ResinGuard FeatherSilicone Mold Support

The 3D model "ResinGuard FeatherSilicone Mold Support" (RGFSMS) is an ingenious support design for generic silicone molds used in the manufacture of resin pens. This support has been designed to address the common problems of overflow and warpage that can occur during the resin curing process.

The RGFSMS is manufactured by 3D printing using PLA material, making it easily accessible to enthusiasts and resin fabricators. Its ingenious and functional design includes a series of strategically placed slots and supports that fit snugly around the silicone mold, providing additional stability and preventing resin spillage. The RGFSMS is easy to attach and remove from the mold, making it easy to use for multiple projects.

This 3D model has been precision engineered to ensure a perfect fit with a wide variety of commercially available resin plume silicone molds. By using the RGFSMS, manufacturers can achieve more consistent, high-quality results in their resin pen creations.

The RGFSMS is an essential tool for anyone looking to improve their resin pen manufacturing experience and ensure impressive results on every project!

Printing Material:

Material Type: PLA (Polylactic Acid)

Temperature Setting:

Nozzle (Hotend) Temperature: 200°C

Printing Platform:

Hot Bed Temperature: 60°C

Print Speeds:

Print Speed: 50 mm/s (May vary depending on your printer configuration).

Additional Parameters:

Starting layer: 0.2 mm

Layer Resolution: 0.2 mm (Can be adjusted according to your quality and speed preferences)

Infill: 20% (Can be varied according to desired strength)

Supports: You can use supports if necessary, but the design of the "ResinGuard FeatherSilicone Mold Support" should be self-supporting.

Remember that these parameters may vary depending on the type of 3D printer you have and the specific preferences of your setup. Be sure to review your printer's recommendations and test for best results. Good luck with your print!