CINEMA LAMP WITH TV REMOTES HOLDER

#LAMPSXCULTS

I don't know about you but I do LOVE a good movie!

Nothing better than chilling in front of the TV and escaping somewhere.

This model has been inspired just by the power of movies.

I created an Art Deco Style Cinema that is also functioning as a lamp and as a place to put your TV remote controls (up to 2).
(In the zip file you will also find a version without the tv remote control pockets at the back of the model).

This model makes clever use of the color change feature in your slicer to create horizontal lines that will light up when you use it as a Lamp, creating a NEON effect.
This is done by designing a thinner wall thickness at specific layer height (fully detailed pdf document included).

This model includes an optional blank plate where you can write your favorite movie TITLE to use in front of the Cinema.
This is done simply by using the new TEXT feature in Prusa Slicer 2.6 and above.

As always, all the parts are printable without any support material and no need for painting.
Full assembly instructions included.
It prints and goes together very easily.

Model size fully assembled:
241mm (9.5in) x 223mm (8.8in) x 236mm (9.3in)

If your build plate is not smaller that 184 x 184 x 120 you can print all the parts as they are :))
So this includes smaller printers, like the PRUSA mini.

All you need is a bit of glue.
I have used NANO GLOOP for PLA and it worked beautifully well with no mess or fingers glued together.

If you click on this link below and use the code ''FULV'' you will automatedly get a 10% discount on your order.
I would recommend purchasing a couple of the NANO bottles which will be plenty for this model.

https://www.3dgloop.com/?partner=FULV

If you have any questions, please do not hesitate to contact me and I will be more than happy to help you.

Fulv :)
fulv@me.com

https://youtu.be/ZFrU_VqG40Y

All the parts in the pictures have been printed at 0.2mm layer height.

Some parts have been printed in VASE mode. Details instruction PDF document included in the zipped file.

OPTIONAL:
Some parts have been designed to utilize a color change feature in your slicer. (fully detailed pdf document included)

Filament of choice:
Polyterra PLA
PolyLite Silk PLA
PolyLite PETG Transparent (for the transparent parts). You can use any transparent or translucent PLA too).

Pdf documents with the list of colors used provided in the zipped file.

Slicer:
CURA
Prusa Slicer

You can print the PDF document scale 1:1 on an A4 printer to help you with everything, VERY EASY I promise.
The longest print is the Top Floor, about 9 hours at 30mm/s speed).

If your printer has a build plate no smaller than 184mm x 184mm x 120mm you can print all the parts as they are.
That includes the PRUSA MINI.