2 versions Airsoft/Paintball break-barrel pistol shotgun

First ever airsoft break-barrel gas airsoft shell shotgun pistol!

There are two versions of this pistol, one that is longer and more angled grip and one that is shorter and has more of a style to it. In your purchase you get both versions to print and enjoy.

In terms of compatibility, my design was based off of the Goblin gas airsoft and paintball marker shells although I believe it is compatible with other gas shells on the market.

The assembly is fairly straightforward:

1) The core and the trigger are connected by a single click-pen spring that fits on the trigger notch and into a whole below the pin slot that goes through the core.

2) The pin slides into the long slot with the tab going through the pin hole in the end of the core.
Note: Make sure the trigger tab goes through the hole in the middle of the pin's frame.

3) The backplate holds in the pin. Feel free to use a screw or glue it in place.

4) The side pannels hold the core parts together as well as the barrel to allow it to swing open.

5) The triggerguard and grip frame fit into the core neatly in place.

6) The breech lever keeps the barrel closed when turned so the sight posts align.

7) The grips go on last.

The provided frame pins hold the parts together!

A simple, easy to assemble airsoft break-barrel shotgun pistol and all you require is a click-pen spring to assemble. Enjoy as a backup piece or for fun!