Togepi,Togetic,Togekiss Evolution -FAN ART - POKÉMON FIGURINE -POKEMON

This is "Togepi,Togetic,Togekiss Evolution" from Pokémon series
I will be releasing my work on daily basis, some may even be free! so please follow and keep your eye on my updates !!cheers

PLEASE CHECK THEM OUT(OTHER 3D MODELS FROM THE SAME DESIGNER)!

Togepi is a small, light-yellow Pokémon with a rounded, egg-shaped body. After hatching from its Egg, Togepi's body remains encased in its eggshell. That shell has a white base color, and rounded, mostly unfilled shapes (with thick borders that are either red or blue) dot the shell on all sides. Sticking out of its shell, Togepi has stubby, rounded cone arms and round feet with two toes each. Togepi has thin, black, oval eyes with thin, black arcs on their outer sides. Its head has five round-tipped, conical spikes that seem to form a crown. It also has semi-oval, brown pads on the soles of its feet.

Togetic is a dainty, bipedal Pokémon that is small in stature. It is white with a red and blue triangular ring pattern on its body. It also has a relatively long neck and long legs and a pair of wings on its back, giving it a vaguely angelic appearance. Togetic is capable of levitating itself without needing to flap its wings.

Togekiss is a white, avian Pokémon with an ovoid body. While its feet are small and situated closely together, its wings are broad and triangular. Red and blue triangular markings over its underside, and it has a short tail consisting of three feathers. On the back of its head are three spikes: a red-tipped one on the right, a blue-tipped one on the left, and a pure white one in the middle. Togekiss has a relatively flat face and small, black eyes.

*This model require minor support to print with FDM .
*to have a better print result I would suggest to print this model in angle where the front surface facing upwards to avoid support structure in FDM prints, for DLP & SLA should be fine.