Vintage Star Wars Throne for Emperor Action Figure

This throne fits the vintage Star Wars 3.75" action figure: The Emperor. It has the throne with simulated legs built in. You place your vintage Emperor action figure inside. These files do not include any background parts, just the throne with legs.

There are multiple variations of the Emperor that are thinner and wider - this should fit all, but if you find one that does not fit, please let me know! The legs will need to be painted to match your Palpatine's color.

The Emperor stands inside this throne, similar to how the vintage TaunTauns or Dewbacks work. The seated legs are simulated on the throne with his real legs inside. Simply snap the throne apart, insert old Palps, and snap back together. There are holes present to fit these 5mmx2mm disc magnets: https://amzn.to/3G37fCd

For general display, you don't need the magnets, but it makes for a nice secure fit if you do.

I assume it will fit retro The Emperor as well, but have not tested.

Filament: Black PLA
Layer Height: 0.2 mm
Infill: 20% works well
Support: Everywhere
Position: Place back of throne to build plate
Adhesion: None

Size (in upright position, both parts together):
Base: 3.25" x 2.477" (82.55 mm x 62.92 mm)
Height: 4.218" (107.14 mm)

I usually print each half separately, and each can take 3-5 hours depending on your settings.