Hot air balloon lamp / Hot air balloon lamp

Lamp design in the shape of a hot air balloon.

It consists of 3 pieces:

• Balloon. Prepared with an opening of 27mm diameter, corresponds to the E27 socket of a light bulb (5,4cm hole).

• Intermediate ring to join the parts of the globe.

• Box or nacelle of the hot air balloon.

The box and ring come with holes prepared for you to thread ropes through and join the 3 pieces together.

The box has 5mm holes

The ring has 3mm holes, so keep this in mind to use a rope suitable for the size.

I use the CULTS PU license for private use, so selling, sharing or modifying my designs for commercial use is strictly prohibited.

If you want to sell 3D prints based on my designs legally, become a Patreon on my page:

https://patreon.com/3DINACTION

Tell me what you thought of my design in the comments.

Please share your impressions and your photos of the finished design with everyone!

Feedback is appreciated!

Follow me for more designs...

Thank you very much

Lamp design in the shape of a hot air balloon.

It consists of 3 parts:

• Balloon. Prepared with a 27mm diameter opening, it corresponds to the E27 socket of a light bulb (5.4cm hole).

• Intermediate ring to join the parts of the balloon.

• Box or gondola of the hot air balloon.

The box and the ring come with holes prepared so that you can pass strings and join the 3 pieces.

The box has 5mm holes.

The ring has 3mm holes, so keep this in mind to use a suitable rope for the size.