Huion Kamvas 24 Plus Accessories Mounts

I just bought the Huion Kamvas 24 Plus and was looking for a way to comfortably use my Wacom EK Remote with it. I decided to make a plate with an attachable back mount that may be changed in the future and for ease of printing.

I ended up using the same mounting system to also mount my Surface Dial and the PW517 pen that came with the tablet.

The Remote mount uses the vent holes in the back of the unit to hold in place. It can be mounted on the left or right side of the tablet towards the bottom. If you want to mount it higher than I show in the folders the back will need to be adjusted or spacers added between the back mount and the tray.

I included left and right hand options for the pen holder.

***The pen holder is meant to clip into the vent holes in the back however the mount is too stiff and I ended up breaking the pins. I filed those pins down and added a strip of double sided and it holds just fine with no looseness or wobble. The pen fits snug but feel free to adjust it to your liking.

Edit** the back mounts attach using M3 hex socket screws and nuts (Two 8mm for the remote and one 12mm for the dial). The remote magnets used are 8x3mm round.

Fusion360, Step and OBJ files are also included with all parts so that you can make adjustments as you need.

Please feel free to remix as needed and let me know if you have any questions or recommendations! Thanks for looking!