Anycubic Mega S Tool box attachment

I used mjuddi bracket mount version and deleted the tool rig, added the toolbox, There are two files, one for right mount and one for left mount. I printed this piece with supports, but I apparently used the wrong support and ended up breaking my bracket when I was trying to remove the support after it was printed. The support doesn't need to be sturdy.
Specs: 20% infil, with brim.

Let me know how yours printed out, so I can update this tool box rig.

Update 9/18/19:
Revised the spatula hanger, should be stronger now, Rev I for left or right side mount.

Update 6/7/19:
increased the dimensions for the spatula to make it a little thicker and stronger

Update 5/5/19:
Reworked the design, toolbox now has dividers, the bracket has been re-centered.

Update 5/3/19
Repaired the design, all is good now

Update 4/24/19
There's an issue in printing the toolbox with the caliper, apparently it isn't attached to the box, I am working to fix that issue

Update 4/23/19
Added a modified tool box, left and right mount files. These ones have the divider inserts

Update: 4/21/19
Revised the toolbox with attachments, brought the box closer to the frame, moved the caliper holder down. Added a left side mount as well

Update: 4/13/19
Added another file which has tool box with caliper and spatula holders for right side mount