Making this printable in 1/25th scale. But as a Pro Street Truck with chassis, interior etc. This is a work in progress. I will be adding files as I go along. I will also be including a stock version down the road. Original body design was made by by Alexby in 1/10th scale and meant for Traxxis (RC car/truck chassis). AMT did produce a 69 Chevy Fleetside but that kit is super rare these days. I included a photo of that kit. You just have to provide your own wheels and motor.
Let me know if you require something to be added to the files. A zip file is also available if you just want a single download
UPDATE: 4/25/24
Added half chassis for those who have smaller printers
UPDATE: 12/29/23
For those who are looking for a stock interior. I came across these files for a Chevrolet Panel Truck 1970. It isn't free and is available in CGTraders, author is Andrey Bezrodny.
UPDATE: 11/26/23
Added the original doors with window frame and rear doors with window frames.
UPDATE: 9/26/23
Added two versions of truck bed, one with license plate holder in roll pan and the other with no license plate. Both of these have thicker walls as per request.
UPDATE: 9/23/23
Revised the crewcab roof, Rev A
UPDATE: 9/18/23
Revised the front grills, apparently it was missing the vertical slats, Rev A.
UPDATE: 9/13/23
Reworked a few parts, all four inner door panels, console with cup holders and front seat, Rev. A
UPDATE: 9/10/2
Added rear valance panel license plate area delete, missing rear bumper and reworked the Ford 9" rearend, Rev B. Added 1 zip file for everything under the file name "1_25th_scale_69_Pro_Street_Chevy_C10"
UPDATE: 9/06/2
Finally completed this Truck, but you will have to provide your own engine and wheels
UPDATE: 5/21/22
My bad, when I created the tires, I had made them directional. So I added the corrected tires, all 4 files have been uploaded, Rev A for 15s and 17s
UPDATE: 5/08/22
Uploaded Rear tires, two sizes, first is a 15x15s and the second is 15x17s
UPDATE: 2/05/22
The model is about 85% completed, Some things were a bit frustrating. I'll will slowly add more files but it is still a work in progress. Added 3 types of Hoods, Stock, Cowl induction and Blower hood
UPDATE: 11/23/21
Made a set of pedals for this truck, original file came from https://www.thingiverse.com/thing:4655106
I modified it to use for this truck
UPDATE: 10/20/21
Not much of an update, but tweak the design for another option build. A Pro-street 69 four door C10 boulevard cruiser
UPDATE: 10/19/21
-Refined and corrected some areas of the truck bed, Rev F.
-Reworked the tailgate to have it a little pronounced lettering, Rev A plus separated the latch as an additional piece so it can be painted a separate color
-The rest of the parts are almost done.
UPDATE: 10/11/21
Uploaded Rev D, had to make clearance in the front of the truck bed for the frames to pass through
UPDATE: 10/10/21
Uploaded Rev C for the Pro Street truck bed. Thicker panels and prints good now in 1/25th scale
UPDATE: 10/09/21
Uploaded a revised truck bed, this time with wall supports, Rev B
UPDATE: 10/06/21
Revised the truck bed, made the walls a little thicker and smoother, Rev A for both Pro Street and stock beds. Also added the tailgate
UPDATE: 10/02/21
Added the tail lights and corrected the lens, Rev A has been uploaded. Uploaded file for the side markers as well
UPDATE: 9/25/21
Added the stock truck bed, this will have the options of stock hood, opened hood, cowl induction and Wall E Blower scoop