HARRY POTTER WAND & STAND - HARRY POTTER - ETERNAL

Replica of Harry Potter Wand, from the Harry potter movies, with an original Ollivander stand.

OBJECT BIO:
Harry Potter's wand was made of holly, and possessed a phoenix feather core. This was described by Garrick Ollivander to be an unusual combination of wand core and wood. The feather was donated by Fawkes, Albus Dumbledore's phoenix.

File format: STL

Level of detail: High

This model has been designed for 3D printing. The model has various parts with matching sockets to join them, but you can glue some of them if you see fit.
The wand comes pre-sliced in three parts for easier printing, and hexagonal cores to unite them.
The support stand can be printed without any supports, and can be assembled without the need for glue, but you can glue it if you need.
The model comes scaled and pre positioned to be printed on an Ender 3 Pro or similar.

DISCLAIMER: My prints were tested in Simplify3d and Cura with 0.20 mm layer height with 3 perimeter walls and 15% infill to have some room for sanding & avoid fragile surfaces.

I offer no support physical for the actual printing process, but for any problem please contact me via mail and i´ll help you right away.

Having to adjust printing positions of the model parts & sanding the print itself is a normal part of the process while making a statue like this.