Cute Cartoon Easter Chick No. 2

This is the second little Chick for your Easter or Garden decoration. It belongs to whole Set of different Chicks

This cute little Chick is about 12 cm / 4.7 Inch in size. It is part of a whole series of chicks that you can use for your Easter/Spring decoration.

This Model contains 3 different Variants, which differ by the Head Position, so feel free to choose the one which fits your decoration at best.

Here are the Models which are released so far:

Chick 1 ( Standing):
https://cults3d.com/en/3d-model/home/cute-cartoon-easter-chick-no-1

Chick 2 (Sitting):
https://cults3d.com/en/3d-model/home/cute-cartoon-easter-chick-no-2

Chick 3 (With Egg):
https://cults3d.com/en/3d-model/home/cute-cartoon-easter-chick-no-3

Chick 4 (Waving):
https://cults3d.com/en/3d-model/home/cute-cartoon-easter-chick-no-4

It is easy to print, especially if you use the new Organic/Tree Supports. If you have a Prusa MK3s or MK4, you can use the attached GCodes, they already use the organic supports.

If you want to use it outdoors, i would recommend to print it with ABS, which works great for this Model.

For the Painting, i used an Airbrush for the yellow Base colour, but you could also use a Brush and acrylics, or choose a yellow Filament. Then I use a thin brush to paint the Eyes, Feet and spout.

Feel free to share your Prints with me, Iam always curious how your Chicks will look like!

If you appreciate my work, please consider to give a Like to this Model.

And If You are interested of my other Projects, feel free to visit me under https://www.instagram.com/tobi_franke/

#EASTERXCULTS

• ABS or PLA work Fine
• 0.2 mm Layer Hight
• recommend White ABS Filament, which gives a good Base Color
• If possible, use tree/organic supports, they work great on this Model