HOT Custom Wheel - Design 02 - fits Tamiya TT02

Here you can buy a hot Custom Wheel Design 02 for Tamiya TT02.

Its not a regular Wheel Design you can buy for Tamiya TT02 Chassis, on the market.

For Chassis: TT02 - Audi V8 DTM (White, Silver);
Tyrewidth: Standard Tamiya - 26mm Width

Includes: The Wheel was designed with the notches and joints as the Tamiya rims have.
It is not just a flat surface like many rim designs here.

Whether the rim is flush with the body depends on the body you are using

Final Printed parts, will need some little Trim / Sanding - depend on your needs and expectations.

If you search for a unique Tuning / Racing / Motorsport Look for your Tamiya TT02 - Here you go with this Design Wheel

Size, Design may vary depending on the 3D print!

Suitable for: Only RC Tamiya 1/10 TT-02 (tested)

Paint: i painted the wheel with Tamiya PS, but you can use any paint that will get onto resin printed models.
Be aware, if you add paint to the "joint" - Hexagon, the Fitting will be "tight", just keep that in mind ! :)

HubJoint: If your joint is to "tight, snug" - use a scraper and scrape some material out. the joint is designed tight so there is no place for slippery for fast cars.

Details for Buyers:
Be aware, that you buy the "Digital File" as it is. You DONT get any PART finished from me !

The Quality and Outcome depends on your 3D Printer or others 3D Printers included your´s or their Knowledge.

Disclaimer and IMPORTANT Note:
I am not liable for any consequences or damage or injuries caused by using my 3D constructed File in any form (printed, digital, used,...)!
You are solely responsible for the Usage of the File !

Usage allowed: No resell of this digital file is allowed !
It is for your personal Use.

If it turns out that you distribute my file on the Internet without my consent (anywhere on any platform, or store) - I reserve the right to take legal action.

If you buy this 3D designed file from me, you agree to these terms and conditions !

If you want the Original-Files for Selling - please contact me for price agreement.

Best regards
3DShopAT

Printed with Craftsman Resin.
If you print with resin, after wash / cure - place the wheels into mid to hot water, let it stay for a few minutes. After that remove the support (its much easier).
Also be carefull on the thin parts of the wheel, so you dont break the wheel itself, while you mount the tyre.