Blood Bowl 'League & Tournament' Skill Ring

Blood Bowl 'League & Tournament' Skill Ring

This is a lightweight skill ring for use in Blood Bowl leagues or tournaments. Streamlined so it's non-intrusive - more so than my other designs which are bulkier and imposing.

There are variants included for accommodating push fit for GW 32mm Blood Bowl bases, standard 25mm bases - and also a larger 40mm variant.

There are blank plates for customisation if you'd like to add a name/number/position.

If magnets are added(check eBay or Amazon for 6x2 neodymium magnets) - then the bases can also be magnetised for transport solutions.

All skills are included, and are easy to print.

• Fits 32 mm base - Magnet or push fit(GW BB Bases).
• Fits 25 mm base - Magnet or push fit.
• 40 mm version for larger bases. - Magnet only.

• Holds magnet 6mm x 2mm (for transport and/or fixing models in place)

• Holds blank skill bands for customisation such as player names

• Holds skill bands

Files included are:

• Full_Skill_Blank_32mm_25mm.stl
• Full_Skill_Blank_40mm.stl
• Half_Left_Skill_Blank_32mm_25mm.stl
• Half_Left_Skill_Blank_40mm.stl
• Half_Right_Skill_Blank_32mm_25mm.stl
• Half_Right_Skill_Blank_40mm.stl
• Ultimate Skill Ring_40mm.stl
• Ultimate Skill Ring_blank_32mm_25mm.stl
• Ultimate Skill Ring_push_fit_32mm.stl
• Ultimate Skill Ring_push_fit_32mm_25mm.stl
• Skills.rar (all current BB2020 skills)
• Example_Supported_Files(use_own_settings).rar (chitubox example supported files)
• supported.rar (individual supported bases - not skills)
• Name Plates 32mm & 40mm (with numbers)

Printed on an Anycubic Mono SE:

Temperature 25+ degrees C

Layer Height:0.03
Bottom Layer Count: 8
Exposure Time: 1.9
Bottom Exposure Time: 30
Light-off Delay:0.5
Bottom Light-off Delay: 0.5
Bottom Lift Distance: 6
Lifting Distance: 6
Bottom Lift Speed: 60 mm/min
Lifting Speed: 120 mm/min
Retract Speed: 210 mm/min

Resin: Elegoo Water Washable