PEACH Accessories STL Files [Super Mario Movie]

Peach's accessories from the Mario movie! This listing is for the digital .STL files ONLY.

PLEASE NOTE: due to the filigree, we do not recommend printing this tiara on an FDM printer. The upper areas get very thin, and it is unlikely a regular hobbyist level FDM printer will be able to achieve this, even with a 0.2mm nozzle. To reiterate: WE RECOMMEND ONLY PRINTING THIS WITH A RESIN PRINTER. Additionally, this tiara is Very Fragile (especially at the tips!), we've edited this as much as we can to make it stronger without making it look chunky, but please be careful with it! You'll want to be using light supports with very small contact points, and even then you'll still need to be Very Careful when removing the supports!

The tiara measures approx. 110mm in diameter and the gems are printable on most, if not all, resin or FDM printers. The gems are all separate prints so they can be coloured or cast!

Please allow 2-4 weeks print time!

Don't forget to tag us in social media posts featuring our props/accessories as @illustrismodels (instagram/twitter/tiktok) and Illustris Models and Printing (Facebook). Support us so we can continue to support cosplayers like you!

PLEASE NOTE: due to the filigree, we do not recommend printing this tiara on an FDM printer. The upper areas get very thin, and it is unlikely a regular hobbyist level FDM printer will be able to achieve this, even with a 0.2mm nozzle. To reiterate: WE RECOMMEND ONLY PRINTING THIS WITH A RESIN PRINTER. Additionally, this tiara is Very Fragile (especially at the tips!), we've edited this as much as we can to make it stronger without making it look chunky, but please be careful with it! You'll want to be using light supports with very small contact points, and even then you'll still need to be Very Careful when removing the supports!