HDR50 Bodykit Carabiner + Magazine Holder

Assault rifle body kit with 2 magazine holders for the UMAREX T4E HDR50 Homedefence & Paintball Revolver.

STL file for the Umarex HDR50. Assault rifle. For own 3D printing.

You will receive the corresponding 3D printing data in STL format when you purchase. We will send you as soon as possible a link where you can download all files. You can decide for yourself in what resolution, color, etc. You want to print this. Absolute eye-catcher for the Umarex HDR50. The large printed components are pinned and glued together with 6mm pins. You can take locating pins or cut round material for pinning.

The HDR50 is slid into the rifle kit from below with a very precise fit and screwed in place with four M4x50mm screws. The 6 Picatinny rails and the individual parts of the buttstock at the shoulder are screwed and glued. Up to 4 Picatinny rails can be mounted on the front of the barrel.

If you have installed a tuning barrel that protrudes slightly from the HDR50 (M15x1), this will also fit.

The Rifle kit has a barrel diameter of about 14mm. Thus, the Rifle kit is not a tuning, but only a visual upgrade.

You will receive all the necessary data to make your own personal body kit, as shown in the pictures, including exploded view of the individual components and parts list of screws and pins.

We have completely designed the Rifle kit by ourselves over a long time.

So we will be happy to answer any questions you may have.

Max. 0.3mm layer height.

Min. 20% infill