3D printable Roland D-05 module support 3.0 / 3D printable Roland D-05 module support 3.0

Soporte 3D modelo 3.0 para Módulo Roland D-05 / Roland D-05 module support model 3.0 (for Roland's boutique) 3D printable

Buying link / Buying link (Cults3D - CuevArt)

https://cults3d.com/en/3d-model/gadget/roland-d-05-soporte-1-0-roland-d-05-support-1-0-for-roland-s-boutique

Youtube video link

https://youtu.be/Dp3X220J9yI

3D Stand for Roland D-05. Design by CuevArt - George Cuevas Art with rights reserved. Suitable for the Roland boutique whose modules have the following measures: 300 x 128 x 38mm and an approximate weight of 900 gr.

The stand consists of 6 pieces for 3-D printing.

-Base rail 1 pc.

-Lateral supports 2 pcs.

-Transition base 1 unit

-Closing handles 2 pcs.

Common parts with standard sizes that can be purchased at any hardware store to complete the assembly (Not included).

-Screws 30mm long x 8 mm diameter 2 pcs + their corresponding nuts.

-Screws 30 mm long x 5 mm diameter 2 pcs + corresponding nuts

Assembled it weighs 272 gr. It can be adapted to any 5/8 or 15.8 mm microphone stand thread and thus be mounted on any other stand.

ENGLISH

Roland D-05 module support model 3.0 (for Roland boutique) 3D printable

3D printable support for Roland D-05. Design by CuevArt - George Cuevas Art, with all rights reserved. Suitable for Roland's module boutique witch have the following measures: 300 x 128 x 38mm and an approximate weight of 900 gr.

The support consists of six pieces for 3-D printing

-Rail base 1 unit

-Side supports 2 units

-Transition base 1 unit

-Locking cranks 2 units

Common pieces with standard measures that can be purchased at any hardware store to complete setup. (Not included)

-30mm long x 8 mm diameter screws 2 units + its corresponding nuts

-30 mm long x 5 mm diameter screws 2 units + its corresponding nuts

Mounted weighs about 272 gr. It can be adapted to any 5/8 or 15.8 mm microphone stand thread and thus mounted on any other stand.

Recommendations for printing

-Print in PLA with temperature characteristics recommended by the manufacturer.

-Parts should be robust so the print should have no less than 70% infill.

-Can be printed in any color of your liking.

-Rail base should be printed horizontally with backing material and border on the first layer for perfect adhesion to the bed. Printing time about 14 hours

-Side supports should be printed with their long axis vertically, using border on the first layer.Backing material required. Printing time about 15.5 hours both at the same time.

-Transition base and locking cranks are printed together in the same stl file. The transition base should be printed with its long axis horizontal and the opening for the microphone adapter facing up. The locking handles go with the widest part towards the bed. It is necessary to use support material. Use border on the first layer for perfect adhesion to the bed. Printing time about 8.5 hours

-All prints should be robust (70% infill) and fine finish.

-recommended infill pattern Zig Zag

-Any future modifications to this model can be downloaded free of charge for those who have purchased the current model.

ENGLISH

Printing recommendations

-Print in PLA with the temperature characteristics recommended by the manufacturer

-The pieces must be robust so the print must have a filling of no less than 70%.

-Can be printed in any color of your liking

-The Rail base must be printed horizontally with support material and use edge in the first layer for perfect adhesion to the bed. Printing time about 14 hours

-Side supports should be printed with their long axis vertically, using border on the first layer. It requires support material. Printing time about 15,5 hours both at the same time.

-The transition base and locking cranks are printed together in the same stl file. The transition base should be printed with its long axis horizontal and the opening for the microphone adapter facing up. The locking cranks go with the widest part towards the bed. It is necessary to use support material. Use edge on the first layer for perfect adhesion to the bed. Printing time around 8.5 hours

-All prints must be robust (70% filled) and fine-finished

-Recommended infill pattern Zig Zag

-Any future modification of this model can be downloaded free of charge for those who have purchased the current model.

Keywords: #roland #rolandD05 #support #boutique #rolandboutique #rolandd50 #Musicgadgets