EINHELL on DYSON V7 and V8

**EINHELL Power X Change adaptor for DYSON V7 and V8 cordless vacuum cleaners

New model 2024!

To avoid index finger cramps ;-)

You have the option of using the vacuum trigger and a switch for permanent operation.

You can install only the micro switch for the trigger or only the switch.

If your Dyson's battery is dead,

rather than buy a replacement battery (or a replacement vacuum cleaner),

use this adapter.

Our Dyson vacuum cleaner is a beautiful tool,

but when the battery is empty we have to stop working.

I solved this problem. The battery is now external.

The vacuum cleaner works much better with the larger 4 amp-hour battery.

2 versions, round or flat terminals.

*The wall bracket remains operational, just replace the top part with the printable bracket *.

Normally the Dyson cuts the battery on power-up, it makes several steps, stops and then stops.

Do not insist and change the battery.

Supplies

10 Wood screws 3 X 16mm

2 Flat terminals 6.3mm

or

2 Flat Electric terminal 6.3 mm Blue

1 Spring 5.5 X 17.5 mm

2 female terminals

2 non-insulated 4.8 mm female terminals (or solder wire)

1 Micro switch 20 A

Cable

1 Rocker switch

Toggle switch

4.8 female electric crimp terminals

Terminaux femelle

Spring

Flat 6.3 mm electrical terminal

Flat 6.3mm terminal

Micro switch

WARNING! check your wiring before use to avoid damage. Reversed polarity can be fatal.

With CULTS license Private use,

you are authorized to manufacture adapters for your own use.

It is not permitted to resell or give away the files and adapters created.

With brackets and 80° cantilever angle

There are very few brackets, and they're easy to remove.

-Layer height: 0.2 mm

-Filling density: 30%.

-Number of wall lines: 3 or 4

-Top and bottom layers: 4 or 5