DPI CHC-10: FNV 10mm Conversion For KWC Desert Eagle Prop Version

An iconic design based off of the N99 10mm pistol from Fallout New Vegas. From the first time we played the game we fell in love with the pistol despite its less-than-stellar stats. Naturally, we could see the loose resemblance of the N99 and the DE 50AE, and thought it would be cool to see if we could make one, or at least something close. Eventually we came up with the idea to make a conversion for the pistol we had on hand and the rest was history. This design uses a KWC Desert Eagle as the base and has a very simple installation process. The conversion kit is designed to slide onto the frame securely without hindrance to the slide function. As this is the prop version it will not fire, and cannot be confirmed to fit with the air nozzle installed currently. This Kit also replaces the entire outer barrel thus deleting the inner barrel and hop up chamber assembly. The slide, trigger, hammer, slide lock, and barrel lock all work as designed. We are still in the process of creating a custom hop up for this model and possibly a printable nozzle. Those will be released when finished and this post will be edited with the details.

Any 3mm rod, pin or screw can be used to hold the two components together. It could also be friction fit together depending on printed tolerance, or you can use the provided file that is a pin with the correct angle cut.

Take your Fallout cosplay to the next level!

Standard Polylactic Acid settings should work, but varies by printer.
We used an FLSUN Super Racer
Printing at 150mm/s
220 degree nozzle
65 degree hot bed
Supports enabled
Printed standing up on front end