No Trespooping Lawn & Yard Sign to Thwart Puppy Dog Poop

Is someone letting their dog poop on your lawn? Does yelling at neighbors and dog walkers seem awkward? It doesn't have to be with this cute but effective yard sign. Tell your neighbors to keep their pooch's pooh off your lawn with these funny No Trespooping! yard signs.

They come in two sizes - a Small Sign for that gentle reminder, and Large Sign for repeat offenders who aren't getting the hint.

The STL Files in this download include:

• No Trespooping - Small
• No Trespooping - Large

DIMENSIONS
The STL file for the Small Dog Sign is tilted for easy printing at 100% scale on a standard-size 3D printer. When finished printing and stood upright, it measures:
- X = 13.5cm / 5.3in
- Y = 21.1cm / 9.5in
- Z = 0.45cm / 0.18in*

• The actual sign is only .26cm thick. The rest of its 0.45cm depth (Z) is a raised line on the stake to help hold it in the ground. If you scale the sign down, only adjust the X and Y. Leave the Z scale at 100%.

The Large Doggie Sign is modeled for bigger print beds up to 400x400, but can be easily scaled down to fit on a standard size printer (220x220). If scaling down, only scale the X and Y. You should keep the Z scale at 100% to maintain strength.

At 100% scale, the Large No Trespooping Sign measure:
- X = 33.3cm / 13.8in
- Y = 33.3cm / 13.8in
- Z = 0.3cm / 0.12in

For a standard print bed, I suggest scaling it to 65% on X and Y, and 100% Z. This will reduce the measurements to:
- X = 22.0cm / 8.7in
- Y = 22.0cm / 8.7in
- Z = 3.0cm / 0.12in

If you like the No Trespooping Lawn Sign, please check out our ever-growing portfolio of STL models.

• https://www.cults3d.com/en/users/GetPrinted3D/creations

IMPORTANT: Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial License to legally sell our designs here:
- https://www.patreon.com/GetPrinted3D

These signs print out well with basic settings and a relatively high speed.

Recommended Settings
Layer Height / Resolution: 0.2
Infill: 20
Infill Patter: Grid
Walls / Shell: 3
Top/Bottom Layers: 4
Speed: 80mm/sec
Support: No
Adhesion: No
Approximate Time: Small 3 hours / Large 10 hours

You'll need to perform a filament change to get a multi-color effect. If your printer supports color changing (i.e. "Extensions > Post Processing > Pause at Height" in Cura), switch from Black to White, or vice versa (or any other colors you like). If your printer does not support this, you can always keep an eye on it, pause the print and change the color at an appropriate time. Or, simply paint over the top. The edges are beveled high enough to make for easy painting.