SENSOR HOLDER HC-SR04

This STL model is a holder designed for the HC-SR04 distance sensor with an inclination of 30 degrees to allow better detection in a specific range. The bracket is designed to be 3D printed on any FDM printer.

The dimensions of the bracket are 50 mm wide, 60 mm long and 35 mm high. The hole for the HC-SR04 sensor has a diameter of 16 mm, which ensures a perfect fit for the sensor.

This STL model is designed with a solid base to ensure the stability of the holder. The 30 degree tilt angle has been incorporated into the design to ensure that the sensor is pointing in the correct direction.

It is important to note that printing parameters may vary according to customer preference and desired quality. While we have recommended that this model be printed in PLA, the material and print settings can be adjusted to suit the customer's tastes.

Print quality can also vary depending on print settings such as print speed, layer height and fill density. It is important to experiment with different settings to achieve the desired results.

Therefore, when printing this model, it is recommended that the customer adjust the printing parameters according to his taste and desired quality. In this way, the best results can be obtained and customer satisfaction will be guaranteed.