Skip to content

Wheel offset fitment tool 14"-20" or 14"-22"

20230426_032654.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230422_110845.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230422_105157.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_183526.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_183453.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_183049.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_183035.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_182744.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_182120.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_182040.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230421_182024.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230426_033242.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230426_033214.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230426_033152.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230426_033123.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230426_032859.jpg Wheel offset fitment tool 14"-20" or 14"-22"
20230426_032804.jpg Wheel offset fitment tool 14"-20" or 14"-22"
Wheel-fitment-14-22.jpg Wheel offset fitment tool 14"-20" or 14"-22"
Wheel Offset Tool kit.stl Wheel offset fitment tool 14"-20" or 14"-22"
Wheel Offset Tool 20in_22in.stl Wheel offset fitment tool 14"-20" or 14"-22"
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 2.7/5 (7 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 27.8k views
  • 24 likes
  • 226 downloads
  • 1 comment
License
3D design format
STL Folder details Close
  • Wheel Offset Tool 20in_22in.stl
  • Wheel Offset Tool kit.stl

Learn more about the formats
Last update 2023-06-22 at 05:03
Publication date 2023-04-26 at 07:08
Design number 1188221
DanD3D

DanD3D

3D printer file info

3D model description

This wheel offset tool was designed and patented by me based on others that I seen on the internet. Those I saw are not printable via their files but mainly to be purchased online which I totally understand.

Therefore i came up with my own and offering it to you as a buyable file. I printed this with my MSLA ELEGOO SATURN S out off ABS LIKE RESIN mix so: 40% Siraya Tenacious for a bit of flexibility and 60% Siraya Fast for the strength with no support Also printed it with my CREALITY ENDER 3 PRO w/o support at 20% infill and also turn out great.
Good for most common hub bolt pattern. Tried 5x120 -5x114.3 -5x112 -4x110 -4x100 and center hub is 76.3mm max!

This offset tool is purposely designed to give us an idea of the maximum offset without sticking past your fenders. I also used my DeWalt laser to get more of a precise line up to my inner fender.
There are methods to put proper weight on the A-arm/hub when you are checking to make sure car is well/evenly seated. It is very accurate but can be within (+/-) 1-3mm depending on your prints but can still be close enough!

(I measured from ground the center hub wheel when sitting normally then lowered floor jack with another jack under A-arm until at precisely same height to center hub without wheel then check with this tool) DO NOT JUST PUT A BRICK UNDER IT..... DEFINITELY NOT THE PROPER RIDE HEIGHT UNLESS YOU HAVE A BRICK UNDER EACH WHEEL!!!!BUT STRONGLY DOUBT IT.

If you need more in depth dimensions in regards to how your tire will sit and end up being like, this is not the right tool for you.

DESCRIPTION
Offset: +45 /-45
Wheel diameter: 14"-20" or 14"-22"
Wheel width: 6"-12" WIDE

3D printing settings

As per description

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.