Skip to content

F-9 Panther test parts

F-9a.jpg F-9 Panther test parts
F-9.jpg F-9 Panther test parts
PANTHER-COMPLETED-v24.png F-9 Panther test parts
FUSE 2 RECESSED.stl F-9 Panther test parts
WING 1R.stl F-9 Panther test parts
STAB (1).stl F-9 Panther test parts
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.1k views
  • 8 likes
  • 101 downloads
License
3D design format
PDF and STL Folder details Close
  • FUSE 2 RECESSED.stl
  • PANTHER COMPLETED Drawing v3.pdf
  • PANTHER COMPLETED EXPLODED Drawing v3.pdf
  • STAB (1).stl
  • WING 1R.stl

Learn more about the formats
Publication date 2023-04-29 at 02:59
Design number 1193234
bktim1988

bktim1988

3D printer file info

3D model description

Couple test parts for F-9 Panther LW-PLA (some regular pla used)

64mm edf version of the F-9 Panther using LW-PLA. Fuselage 2 is interchangeable allowing for recessed/non-recessed air-intakes which are common differences between the two variants. Set up is for a 3s parkflyer using a 64 or similar sized edf and 3 9g servos for quick and simple setup. Approximately 30" in wingspan and length. Slots in wing and tail for reinforcement with dowel or carbon fiber. Elevator is a split design using a single servo/ a C-adapter for the servo arm is suggested as you will have two control rods controlling the split elevator. 2X 3mm bolts and nuts are used to close edf housing. Best print practices are 2 solid bottom layers and 3-4 solid top layers. You may need to create 3 slicing profiles to prevent the extra layers from affecting internal structures. 0.25 layer height on most parts except Nose and L/R wing tanks. 0.2 layer height to allow rounded surfaces to close properly. Battery tray is printed in standard PLA.

3D printing settings

Printed on Ender 3 V2 using LW-PLA/ Standard PLA for battery tray.

G-codes are created for stock Ender 3 V2 with bowden, however no retraction is used so might be applicable on other printers.

Extruder Temp 240
Bed Temp 55
Nozzle Diameter 0.4mm
Extrusion Multiplier 0.5mm
extrusion width 0.42mm
Retraction 0
Layer Height 0.25mm/ .3 for faster printing
Outline/Perimeter Shell 1 layer
2 solid bottom layers- top layers vary/ 3-4
Default printing speed 3000mm/min

Printed on Ender 3 V2 so use your discretion with your familiar printer setting with LW-PLA

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.