KS2AZL01 - The Lighthouse at Allizport
$14.00 KS2AZL01 - The Lighthouse at Allizport
3D
Published 2023-04-29T07:22:29+00:00
Nasos Maloudis, master sculptor brings this infinitely stackable lighthouse to life. There are two middle floors can be repeated to add height to this glorious model. Large cobras adorn the top while the beacon burns bright.
Aztlan was our first original set in many different ways. It was our first “dungeon” tileset. It was our first request that got developed into a full series and then full kickstarter. For a long while, it was Will baby. Overtime, almost all the Aether Staff have contributed to the ongoing development. It is also our largest tileset series, with well over 1300 models and still growing. It is also one of our customer favorites, with numerous requests and specials driving the development and expansions.
This set, Aztlan Lighthouse at Allizport, is a bonus set asked for by our patrons in 2022. It took a little longer to get it right, but atlast the great fire is lit. The Lighthouse of Allizport is the first major location in a new city, the first integrated city of Azite, Elven, and Human Nations. Located in the far north of the Zafiri Wilds, Allizport provides an aerodrome port for airships to carry cargo far beyond the horizon. This Lighthouse and it’s burning fire are a beacon used by all to bring them to safety.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
| Date published | 29/04/2023 |
| Price | $14.00 |
| Support Free | YES |