PARKSIDE X12 on DYSON V6

PARKSIDE X12 two-battery adapter for DYSON V6 cordless vacuum cleaners

A friend made the remark "Dyson batteries have 22.2 Volts! and you only have 20V!", his wish is granted..

If your Dyson's battery is dead,

rather than buy a replacement battery (or a replacement vacuum cleaner),

use this adapter.

Our Dyson vacuum cleaner is a beautiful tool,

but when the battery is empty we have to stop working.

I solved this problem. The battery is now external.

The vacuum cleaner works much better with the larger 4 amp/hour battery, but with the 2A/h it's not ridiculous.

*Normally the Dyson cuts the battery when under voltage, it makes several steps, stops and then stops *.

**Do not insist and change the battery.

Remove PARKSIDE batteries from the adapter for charging and store the vacuum cleaner.

Supplies

14 Wood screws 3 X 16mm

4 18650 support terminals

1 spring 5.5 X 17.5 mm

2 female terminals

2 non-insulated 4.8 mm female terminals (or solder wire)

1 Micro switch 20 A

Cable

Female electrical crimp terminals 4.8

Terminaux femelle

Spring

18650 case

18650 case

Micro switch

18650 steel spring battery holder

Photos were taken with unfinished parts, but files are up to date.

18650 bracket lugs snap into place.

With CULTS license Private use,

you are authorized to manufacture adapters for your own use.

It is not permitted to resell or give away the files and adapters created.

With brackets and 80° cantilever angle

There are very few brackets, and they're easy to remove.