Herb Garden Planter For Windowsills And Tables - NO SUPPORT!

An original design by Zurlingo-3D

A Herb Garden planter perfect for any windowsill or table.

Holds 6 plants as standard or 12 if you put 2 different varieties in each side of each pot.

The pots all drain into a collection tray to the side of the herb garden. Excess water can be soaked up with a sponge from here.

Removable name plates for quickly changing out. (28 common herb name plates included)

Prints in 2 halves and will fit on any Ender 3 size build plate.

The 'Herb Garden (Full)' file is for people with larger build volumes that may want to print the model all at once.

Really easy and reliable print with no support needed.

Thanks for looking! - Any questions or suggestions, please leave a comment :)

Don't forget to post any makes! - I'd love to see what other people do with this model and what herbs they decide to plant it with!

Herb Garden:

Use a brim and corner tabs to avoid warping. If your model experiences this, i have included a hiding strip that should cover the corners that are prone to warping.

I would suggest a 0.5mm nozzle diameter or less

=<0.25mm layer height

Infill can be anything you like to use. I used 10% gyroid in the example print that is pictured.

Example print in the pictures was printed in JAYO PLA Meta at 0.25mm layer height, 0.5mm nozzle, 110mm/ wall speed, 10% gyroid infill on an Ender 3 S1 Pro with Sonic Pad. - Print time = 5hr45min and roughly 300g of filament.

Name Plates:

0.25mm layer height (Important)

Filament change at layer 2 (in Cura it is the layer before the required colour change) - The text actually starts on layer 3 which should be 0.5mm high in other slicers.