Skip to content

ROOF RACK, FRONT BARS AND LADDER LAND ROVER D90 RC 1/10 CAMEL

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2k views
  • 9 likes
  • 5 downloads
License
3D design format
STL Folder details Close
  • Baca base atras.stl
  • Baca base delante.stl
  • Baca d90 imprimir-Escala_002.stl
  • Baca d90 imprimir-Suports_jerrys_centrals.stl
  • Baca delante.stl
  • Baca lateral.stl
  • Baca trasera.stl
  • Barra_inferior.stl
  • Barra_lateral.stl
  • Barra_superior.stl
  • Base barras techo.stl
  • Escalera.stl
  • Soporte jerry lateral.stl
  • Soporte jerrys entero.stl
  • Soporte jerrys entero.stl
  • Soporte jerrys.stl
  • Soporte jerrys2.stl

Learn more about the formats
Last update 2023-09-08 at 17:34
Publication date 2023-05-01 at 21:58
Design number 1197816
Jaume_DC

Jaume_DC

3D printer file info

3D model description

Roof rack for land rover D90 rc 1/10 camel.

I designed this roof rack for a land rover d90 camel project I did.

There is also the rear ladder and windshield bars that go into the front wings all the way up to the roof.

Goes well to killer body and rc4wd bodies.

3D printing settings

I printed it in ABS and in parts to make the printing easier and more resistant. But it can be printed as you see.

It has holes to screw it to the ceiling, it is necessary to use a separator and not that placates on the ceiling, so it can be adapted to various models.

It has a separate rear ladder, the top is glued to the roof rack and the bottom must be drilled holes to the body and use M2 screws. For the steps there are orifices made and I used 2 mm diameter nails so it is stronger, you have the whole stl in case you do not want to mount it.

You also have the support of the jerry cans, the jerrys you can use some of those that there are for cults, you have to scale them and reduce them a little. These are bolted to the roof rack with M2 screws.

There are also the roof bars, you can print them whole or in pieces as I have done. To join the pieces use a wire or similar of 1 mm of diameter so that the union is stronger.

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.