Customizable Temperature Tower with presets + tool

This is basically the Customizable Better Temperature Tower by kmsd3d (on thingiverse) including:

• several pre-rendered stl files for various filament types
• a list of layer change settings
• the original customizable OpenSCAD file
• an Python3-tool to create the layer change settings

Print with layer height of 0.2mm

In slic3r/PrusaSlicer, go to the tab Printer Settings > Custom G-code > After layer change G-code and add the following for the according filament type / stl file.

;Temp Tower PLA 180-225.stl
{if layer_z==0.6} M104 S225{endif}
{if layer_z==8.2} M104 S220{endif}
{if layer_z==15.2} M104 S215{endif}
{if layer_z==22.2} M104 S210{endif}
{if layer_z==29.2} M104 S205{endif}
{if layer_z==36.2} M104 S200{endif}
{if layer_z==43.2} M104 S195{endif}
{if layer_z==50.2} M104 S190{endif}
{if layer_z==57.2} M104 S185{endif}
{if layer_z==64.2} M104 S180{endif}

;Temp Tower PLA Plus 195-235.stl
{if layer_z==0.6} M104 S235{endif}
{if layer_z==8.2} M104 S230{endif}
{if layer_z==15.2} M104 S225{endif}
{if layer_z==22.2} M104 S220{endif}
{if layer_z==29.2} M104 S215{endif}
{if layer_z==36.2} M104 S210{endif}
{if layer_z==43.2} M104 S205{endif}
{if layer_z==50.2} M104 S200{endif}
{if layer_z==57.2} M104 S195{endif}

;Temp Tower PETG 220-250.stl
{if layer_z==0.6} M104 S250{endif}
{if layer_z==8.2} M104 S245{endif}
{if layer_z==15.2} M104 S240{endif}
{if layer_z==22.2} M104 S235{endif}
{if layer_z==29.2} M104 S230{endif}
{if layer_z==36.2} M104 S225{endif}
{if layer_z==43.2} M104 S220{endif}

;Temp Tower ABS 210-250.stl
{if layer_z==0.6} M104 S250{endif}
{if layer_z==8.2} M104 S245{endif}
{if layer_z==15.2} M104 S240{endif}
{if layer_z==22.2} M104 S235{endif}
{if layer_z==29.2} M104 S230{endif}
{if layer_z==36.2} M104 S225{endif}
{if layer_z==43.2} M104 S220{endif}
{if layer_z==50.2} M104 S215{endif}
{if layer_z==57.2} M104 S210{endif}

;Temp Tower Nylon 240-290.stl
{if layer_z==0.6} M104 S290{endif}
{if layer_z==8.2} M104 S285{endif}
{if layer_z==15.2} M104 S280{endif}
{if layer_z==22.2} M104 S275{endif}
{if layer_z==29.2} M104 S270{endif}
{if layer_z==36.2} M104 S265{endif}
{if layer_z==43.2} M104 S260{endif}
{if layer_z==50.2} M104 S255{endif}
{if layer_z==57.2} M104 S250{endif}
{if layer_z==64.2} M104 S245{endif}
{if layer_z==71.2} M104 S240{endif}

;Temp Tower TPU 210-230.stl
{if layer_z==0.6} M104 S230{endif}
{if layer_z==8.2} M104 S225{endif}
{if layer_z==15.2} M104 S220{endif}
{if layer_z==22.2} M104 S215{endif}
{if layer_z==29.2} M104 S210{endif}

or create your own custom Temperature Tower using temptower.scad and temptower.pyw.