Fogger for fan - Brumisateur pour ventilateur

EN

The summer is pretty hot this year, so a fan is a must. I have one used outside and decided to add a misting function to it. I used a kit sold on Amazon and a timer allows you to trigger the misting for 10 seconds every minute, so you can feel the mist and not get wet.

This misting kit is of good quality and has no water leaks.

Misting kit: https://amzn.to/2K3A6Zt

The timer can be fixed on a garden hose, the departure to the kit is screwed directly at the exit of it. The arrival of the garden hose requires an additional end to screw on it.

Timer: https://amzn.to/2Y4nEO5 (This one allows to set 10 sec of misting per minute for example)

The sprayers are attached to the crown, this can be done with M3x30 screws or quick release clamps. The water inlet is also fixed on the same part. The whole assembly is to be fixed on the fan grill with quick-release clamps.

It is quite possible to oscillate the fan during misting.

A sprayer fixture will allow you to secure the misting system aligned on a wooden cleat, and you can hang it in the air, if you prefer.

Add-on: The timer holder is designed for a 25mm diameter stand. Insert the timer by the thin side of the holder, the clips around the pipes will lock the timer by a rotating motion. Position it well and then insert it on the fan mast.

A file with 3 nozzles instead of 4 has been added. The misting kit allows you to make a fan with 4 nozzles and one with 3 nozzles, with the accessories provided.

ENG

Summer is rather scorching this year, a fan is needed. I have one used outside and I decided to add a fogger function. I used a kit sold on Amazon and a timer can trigger the fogging for 10 seconds every minute, so as to feel the mist and not get wet.

This misting kit is of good quality and does not show any water leaks.

(The links are for France, but allow you to find the equivalent in your country)

Fogger kit: https://amzn.to/2K3A6Zt

The timer can be attached to a garden hose, the start to the kit is screwed directly out of it. The arrival of the garden hose requires an additional tip to screw on.

Timer: https://amzn.to/2Y4nEO5 (This one allows you to enter 10 sec of mist per minute for example)

Sprayers are attached to the crown, it can be done with M3x30 screws or quick clamps. The water supply is also attached to the same part. The assembly is to be attached to the fan grille using quick clamps.

It is quite possible to oscillate the fan during misting.

A spray fixator will fix the misting system aligned on a wooden batten, which you can hang in the air, if you prefer.

Add-on : The timer support is provided for a 25mm diameter foot. Insert the timer by the small side of the support, the clips around the pipes will come to block the timer by a rotational movement. Position it well and insert it on the fan mat.

A file with 3 nozzles instead of 4 has been added. The misting kit allows to make a fan with 4 nozzles and one with 3 nozzles, with the accessories provided.