PILOT HELMET - PILOT HELMET

PILOT HELMET - PILOT HELMET

Scale 1/3 (100mm height). Standard model.

This model has a viewfinder or movable drive lens, which you can print in different types of transparent or translucent colored filament, the options are varied, you decide. The lens is actuated by a coupling knob with the lens (see pictures).

A front half-mask protects the lens; the lens is inserted into a glue groove (see images).

The microphone comes in 2 parts for attaching and gluing (see images).

The tether strap will also need to be glued to the helmet, as per images. No modeling experience is required to assemble this attractive helmet.

All my models are guaranteed for optimization, improvements and modifications if requested by the buyer, contact me if you have any concerns!!!!

Efran.

https://www.instagram.com/efran_napart/

https://www.facebook.com/efranapart

https://efran.imgbb.com/

https://www.youtube.com/channel/UCL6CAgQjY68MrtoY1BpeIQw

UPDATE!!!: a template has been included, to create an inner lining of the front of the helmet.

this will help to take care and avoid a wear friction of the visor or lens, see it and comment, I am always attentive to suggestions.

Thanks

Efran.

12-05-2023

UPDATE!!!: knob and sight glass, have been optimized; the knob features a guide hole for 1/16-inch diameter drill bit, as does the sight glass with a hole in the coupling die with the knob, for the same drill bit diameter.

this, in order to add a thin screw of the same diameter as the drill bit, these screws you can find in some disused toys .

See image for reference.

Efran.

14-05-2023

UPDATE!!!: helmet only without the front end, in low poly.

22-05-2023

SECOND VERSION, "Pilot Helmet Holder", with key hanger; this new design includes a more simplified helmet to be interchangeable with the pilot's bust. see the pictures and you will be convinced.

the whole guide is in the pictures, it is very simple to assemble and a great utility for our personal items.

Efran.

11/06/2023

UPDATE: helmet reinforced side recessed walls, lens has been trimmed coupling die with knob and chin strap, thicker.

27/06/2023

UPDATE: Hull frontispiece with straight edge and through holes for bolting; file "Straight Frontispiece - Curved Oblong" (see image of frontispiece).

10/10/2023

Resin and filament printing