3D Printable Tyres for CASADIO community's Paj3ro & Trailer

This is an updated file of the changes I requested from Andrea Casadio of the 3D printable tyres. He made it specifically for me but I think it's good to share my results with the community so that we can share the results.

I also modified the file so that it can be used for the trailer by Rui Raptor to handle more load. In addition, I added some beads to the original trailer tyres to make them hold on to the rubber well as I realized they were coming off when the trailer is loaded. The default wheels should fit snag because I scaled down the tyres.

So have fun printing and hopefully you will all have an amazing results. Don't hesitate to ask any questions.

Gratitude to designers Andrea Casadio and Rui Raptor for such an amazing work.

link to Paj3ro by Andrea Casadio
https://cults3d.com/en/3d-model/game/paj3ro-mitsubishi-pajero-replica-full-3d-printed-rc-car-kit

Link to trailer by Rui Raptor
https://cults3d.com/en/3d-model/gadget/big-rc-car-trailer-for-1-8-car-models

Printer used is Ender 3 PRO

Filament used is OVERTURE TPU

Basic Settings

layer Height 0.15mm - 0.2mm

wall line count 2-3

infill 0% can also use 5% concentric

Top layers 10-15

Bottom Layers 10-15

Printing Temperature 235-240 recommended or highest on the
spool

Printing speed - 60-120mm/s (check screen shots for more details)

Bed temperature 0-60

Enable Retraction - Distance 4mm speed 25mm/s

Enable cooling - Fan speed 60-80%

ENABLE THE SETTING- make overhang printable to print without supports in CURA. It is under experimental settings.