5" creek chub swimbait

Check out Rustybaits.ca for discounted molds

Design idea: i wanted a Creek chub style bait for the lakes and rivers around here. this is is a open style bait so you can add the weights where you want

size: 5 inch
Weight: 7 BB
Dive depth: top water - slow sinking depending on weight
Target species: bass, walleye, pike, musky, very versatile lure
Rattle: BB's

reccomendations:
-print in 2 halves and superglue\ epoxy them together.
-i use 20ga stainless wire twisted as hook hangers.
-i suggest printing an empty one and see the action before applying paint.
-i used 4.5mm bbs as the rattle.

#fishinglures #lures #fishinggear #fishingaccessories #fishingtackle #3dfishing #3dfishinglures #3dprinting #3dprint #3dprintedfishinglures #fisherman #angling #anglingcommunity #catchoftheday #fishinglife #fishinglove #bassfishing #troutfishing #flyfishing #sportfishing #deepseafishing #freshwaterfishing #saltwaterfishing #handmadefishinglures #DIYfishinglures #customfishinglures #uniquefishinglures #fishinghobby #fishon #fishponds #fishingaddict #fishingfun

I print on an ender 3 pro printer, so my settings may be different from yours, but these are my basics

.6 nozzle for faster print time
nozzle 245
bed temp 90
layer height .16
Infill 20% min recc. 50%
wall thickness 3.6 mm
top and bottom 2 mm

These are all minimums i would print 100% infill if you want it to last.