Skip to content

ProfileBlock™ - Balancing Robot - DIY Robot Platform

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 855 views
  • 1 like
  • 9 downloads
License
3D design format
Folder details Close
  • 18650_Battery_Holder_2x_-_BCT_r01.stl
  • ProfileBlock_DF2020.stl
  • ProfileBlock_DF2020_85mm.stl
  • ProfileBlock_DF2020_Servo_S3003_85mm_R.stl
  • ProfileBlock_DF2020_Servo_SG90_85mm_R.stl
  • ProfileBlock_Interconnector_2020.stl
  • ProfileBlock_Interconnector_2020Gap00a20.stl
  • ProfileBlock_Interconnector_2020Gap02a20.stl
  • ProfileBlock_Knob_HexaM5_B.stl
  • ProfileBlock_SlideGuide_eX-Robot_ESP_Battery_Holder_Mount.stl
  • ProfileBlock_SlideGuide_eX-Robot_ESP_WeMos_Witty_85mm_L.stl
  • ProfileBlock_SlideGuide_eX-Robot_ESP_WeMos_Witty_85mm_R.stl
  • ProfileBlock_StepMotor_Mount_Plate.stl
  • ProfileBlock_Tire_Mudguard.stl
  • ProfileBlock_Tire_Mudguard_B.stl
  • ProfileBlock_Tire_Mudguard_C.stl
  • ProfileBlock_Tool_M5L.stl
  • ProfileBlock_Wheel_Hex_Hub_12mm.STL
  • ProfileBlock_Wheel_Hex_Hub_12mm_x_46mm.STL
  • ProfileBlock_Wheel_Hex_Hub_NEMA17.STL
  • ProfileBlock_Wheel_Hex_Hub_NEMA17_38mm.STL
  • ProfileBlock_Wheel_ID005IOD90OD93T06.STL
  • ProfileBlock_Wheel_ID005IOD95OD100T06.STL
  • ProfileBlock_Wheel_Inline_Mount_ID005OD40M3.STL
  • ProfileBlock_eX-Robot_Battle_Axe_Arm.stl
  • ProfileBlock_eX-Robot_Bottom_Plate_85mm.stl
  • ProfileBlock_eX-Robot_Front_Plate_H60mm.stl
  • ProfileBlock_eX-Robot_Hook_Arm.stl
  • ProfileBlock_eX-Robot_Mace_Arm.stl
  • ProfileBlock_eX-Robot_Mjollnir_Arm_Wine_Fork.stl
  • ProfileBlock_eX-Robot_Rear_Plate_H60mm_WeMos.stl
  • ProfileBlock_eX-Robot_Rear_Plate_H60mm_Witty.stl
  • ProfileBlock_eX-Robot_Regular_Arm.stl
  • ProfileBlock_eX-Robot_Servo_Mount_V.stl
  • ProfileBlock_eX-Robot_Side_Plate_H92mm.stl
  • ProfileBlock_eX-Robot_Spear_Arm.stl
  • ProfileBlock_eX-Robot_Stand.stl
  • ProfileBlock_eX-Robot_StepMotorMount_Plate_85mm.stl
  • ProfileBlock_eX-Robot_Tire_Mudguard+Battery_Holder_V.stl
  • ProfileBlock_eX-Robot_Top_Plate_85mm.stl

Learn more about the formats
Publication date 2023-05-09 at 06:32
?
Published to Thingiverse on: 2017-11-12 at 08:44
Design number 1211238
ZalophusDokdo

ZalophusDokdo

3D printer file info

3D model description

[ Upload 20170424]
[ Upload design concept 20170418]
http://www.thingiverse.com/thing:2256715

ProfileBlock™ - Balancing Robot - DIY Robots Platform

3D Design Tool: SketchUp Pro

ProfileBlock's robots are built on top of an open source Arduino-based(with ESP8266, Raspberry Pi) platform.

Hardware

Base Plate(Parts):
- 6 x ProfileBlock DF 2020 85mm
- Acrylic Plate (t = 3mm)
- 1 x Top Plate
- 1 x Bottom Plate
- 2 x Step Motor Mount Plate
- 1 x Front Plate
- 1 x Rear Plate
- 3D Printing Parts
- 2 x Servo Mount ProfoleBlock
- 12 x Knob M5 Hexaheard
- 2 x Wheels 100mm or Inline Wheels 70mm(with 2 x Inline Wheels Hub)
- 2 x Tire Mudguards
- 1 x Stand
- 1 x Battery Holder
- Wheels
- 2 x O-ring 100mm(OD) x 5mm(T)

Step Motor:
- 2 x NEMA 17 - Phase: 4, Step Angle: 1.8 Deg/Step, Holding Torque: 2.6Kg.cm

Servo:
- 1 x SG90 Metal Servo or Standard Servo (Option)

Bolts and Nuts:
- 12 x M5 8mm Nylon Bolts (***M5 Need taping)
- 12 x M5 Nylon Nuts
- 8 x M3 8mm Bolts
- 4 x M3 10mm Bolts
- 4 x M3 15mm Bolts
- 8 x M3 Nuts

Electrical

Control Board:
- 1 x ESP8266 Witty Cloud or WeMos D1 mini (eX-Robot)
- 1 x GY-521 (MPU6050)
- 2 x A4988 Step Motor Drive
- 1 x LM1117-5.0 5,0V 1A Regulator
- 1 x LM1117-3,3 3,3V 1A Regulator
- 6 x 100uF 25V Capacitor
- 4 x 0.1uF Capacitor
- 1 x 220KOhm Resistor
- 1 x 100KOhm Resistor
- 4 x 10KOhm Resistor
- 7 x 8P Female Pin Header Connector 2.54mm Pitch
- 3 x 4P Male Pin Header Connector 2.54mm Pitch
- 2 x 3P Male Pin Header Connector 2.54mm Pitch
- 3 x 2P Male Pin Header Connector 2.54mm Pitch
- 1 x 2EDGK 5.08mm 2P Plug-in terminal connectors set
- 1 x Right Angle SPDT 4 Pin On-On I/O Boat Rocker Switch

Power Requirements:
- 8.4VDC ~ 12 VDC

Battery:
- 2 x 18650 Litum Ion Battery

Software:
- Arduino IDE (ESP8266 ESP-12E/F)
- Support SoftAP and Station mode
- Support OTA (at Local network)
- Support mDNS (at Local network)
- TouchOSC UDP control

Code:
- Source code is available here:
https://github.com/ZalophusDokdo/eX-Robot-ESP

The open source ProfileBlock hardware and software is free and made with love. Please show your level of support with a voluntary donation.

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE

Zalophus's DesignHouse: http://zalophus.tistory.com/​​ and https://zddh.blogspot.com/​​

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.