Crazy bird aviary / bird house

This birdhouse is designed for nature and bird lovers. The protection of these little animals is crucial.

The floor has a sliding lid so you can clean the house by simply removing the bottom lid.

The round access windows to the house are 38.5mm in size, meaning that birds will fit through:

Flycatcher with ash-throat - 1 1/2 in.

Black-capped Chickadee - 1 1/8 inches / 2.85 cm)

Carolina Chickadee - 1 1/8 inch (2.85 cm)

Carolina Wren - 1 1/2 inches (3.8 cm)

Downy Woodpecker - 1 1/4 inches (3.2 cm)

Eastern Bluebird - 1 1/2 inches (3.8 cm)

Wren House - 1 1/4 inches (3.2 cm)

Prothonotary warbler - 1 1/8 inches (2.85 cm)

Tree Swallow - 1 3/8 inches (3.5 cm)

Paro copetudo - 1 1/4 inches (3.2 cm)

Violet green swallow - 1 1/2 inches (3.8 cm)

White-breasted nuthatch - 1 1/4 inches (3.2 cm)

The idea is to glue all the pieces of the house together so you don't have to use screws.

Dimensions assembled: X:250mm , Y:308mm, Z:355mm

All color changing elements separately:

-Detachable floor for cleaning the bird house: X: 220mm Y:220mm Z: 6mm.

-House: X:160mm, Y:200mm, Z:240mm

-Roof: X:240mm, Y:200mm, Z:130mm

-Square windows (each window measures ): X:50mm, Y:50mm, Z:5mm

-Round window: X and Y:54.5mm, Z:8mm

-Fence: X:43.48mm, Y:200mm, Z:61.49mm

-Crazy bird: X:105.89mm, Y:10mm, Z:133.45mm

-Crazy bird stick: X:10mm, Y:80mm, Z:10mm

I use the CULTS PU license for private use, so selling, sharing or modifying my designs for commercial use is strictly prohibited.

If you want to sell 3D prints based on my designs legally, become a Patreon on my page:

https://patreon.com/3DINACTION

Tell me what you thought of my design in the comments.

Please share your impressions and your photos of the finished design with everyone!

Feedback is appreciated!

Follow me for more designs...

Thank you very much