Micro Apex 4 Frame Mounts DJI 03 Air Unit + GPS MOUNTING (Digital Download Only)

DIGITAL DOWNLOAD ONLY
Each design as listed by “FLYTEC3D” has been optimised for strength, durability and fully tested.

PRODUCT SPECIFICATIONS
Micro Apex 4 Frame Mounts DJI 03 Air Unit + GPS MOUNTING, designed to hold the new DJI 03 Air Unit and camera, fits Mr Steele MICRO APEX 4 Frame, perfectly aligned maximum camera tilt 0 - 75 deg approx. Mounting supports the Beitian BN-180 GPS size 18 x 18 x 6 mm if required. There are a few extra parts that I use on my own quad, a mount for the TBS Tracer receiver and capacitor holder and for a Rapidfire antenna, there are alternative design mounts included. In my personal build I went with a SKYSTARS F722HD Pro Flight Controller, for easier fitting I would suggest the 20 mm*20 mm MAMBA MK4 F722 MINI F55/F65-128K MINI. A lighter flight controller, combines with my designs and light motors, will also allow you to go SUB 250G. The DJI 03 Antenna is wide, but with a little force you can push it through the rear support. Finally, in your download, there is a FREE lens protector mount to help secure a DJI ND filter and a normal lens protector.

N0 PROPS OR STAND-OFFS IN VIEW

YOUR DOWNLOAD
⦁ Print ready (GCODE)
⦁ Original (STL )
⦁ Original ( CURA ) project file/ adjust slicing)

NO POSTAGE COSTS / INSTANT DIGITAL DOWNLOAD / MAKE A 3D PRINTED BACKUP COPY

REMOVING PRINT SUPPORT MATERIAL
With most common 3d filament printers there is support material, remove slowly and carefully.

OVERVIEW
FLYTEC3D offers custom FPV drone parts, 3D print ready, instant “DIGITAL” downloads.

HELP AND CUSTOMER SERVICE
Any questions or ideas please do contacts always happy to help.

TERMS &CONDITIONS
Purchasing from “FLYTEC3D” you engage in our “Service” and agree to be bound by the following terms and conditions. An instant “DOWNLOAD LINK” will automatically be sent from Etsy once purchase has been made. FLYTEC3D can't accept returns, exchanges or cancellations.

DISCLAIMER
FLYTEC3D will not be held responsible for the use and/or misuse of this product.
Any damages to equipment or bodily damage are solely the responsibility of the purchaser.

COPYRIGHT © FLYTEC3D 2022
The owners of the intellectual property and copyrights “FLYTEC3D”. You may not reproduce, republish, modify, copy, transmit, upload, post, or distribute, in any manner, including text, graphics, and code without written permission.

PRINTING RECOMMENDATIONS
⦁ Sainsmart tpu 95a / Sure Hardness
⦁ Print Nozzle 0.4 mm / For best results