Spider-Man PlayStation 4 with mechanical lenses . files for self-assembly on a 3D printer

HELLO !!!

attention you buy files !!! , you are buying files to assemble the mask yourself .

you are not buying a ready made mask

/////////

Watch the tutorial. go to the link https://www.youtube.com/watch?v=x0mqmfc5ey8

---

the link is not active, copy it into the search box and watch the instruction video

//////////////////

my youtube channel https://www.youtube.com/channel/UCtEuyl6HnwxBGTIVsvwzpHw

//////////////

Now you can build a mask of Spider-Man from a PlayStation 4 game with a 3D printer and my files

what do you buy?

1) files for 3d printing

/The front shell is whole, the front shell is divided into two parts for printers with printing area 220h220h250

/Lens, right and left

/lenses movable

/servo drive mechanism mg 90s and sg90

/ boom

/housing for infrared sensors, cover for tumbler, cover for infrared sensor board

2) templates for lens and chin

3)sketch for arduino , detailed wiring diagrams for the spider man mask electronics

!!!!!!! all files are archived, to unzip them use the winrar archiver !!!!!!

//////////////////////////////////////////////////////////////////////////////////////

recommendations for 3d printing !!!

1) I print the face shell with a nozzle 0.6 / layer height 0.3 / speed 60 / support / plastics Petg

with these printing parameters the mask will print about 17 hours

2) Lens / nozzle 0.4 / height 0.2 / speed 60 / backing / plastics Petg

3) printing of mechanism and other parts /nozzle 0.4 /height 0.2 /speed 60 /plastic petg

//////////////////////////////////////////////////////////////////////////////////////

ARDUINO

the sketch specifies a servo angle of 94 degrees , this is the right angle for my servos,

.

If you don't like the angle, you can change it.

if the sketch does not work on your board you can try

to download arduino version 1.0 or 1.0.6

//////////////////////////////////////////////////////////////////////////////////////

the tools and materials you will need to build the spider-man Playstation 4

1) 3D printer

2) computer

3) pliers

4) insulation cleaner

5) file

6) utility knife or scalpel

7) screwdrivers

8) scissors

9) screwdriver

10 hair dryer

11) soldering iron with a thin needle

12) tin with solder

glue

1) hot glue gun

2) rubber based glue

3) cyanoacrylate glue

other

1) transparent plastic 1mm thick / size 15x40 centimeters

2) perforated film / 15x40 cm

3) eva foam 1-3mm thick / size 10x15 centimeters

4) !!!!!!22 screws m3 length 10mm and 3 screws m3 length 25mm !!!!!

////////////////////////////////////////////////////////////

THE ELECTRONICS NEEDED FOR THE ASSEMBLY

1) arduino nano or pro mini

2) IR sensor HW-201 2 pcs.

3) IR diodes Tcrt5000L two pieces

4) 10 K resistor

5) SS12D00G3 toggle switches 2 pcs.

6) MG 90s servo drives 2 pcs. or SG90

7) battery compartment for 2 AAA batteries 2 pieces

8) 4 AA batteries 1.5 volts (I recommend to buy rechargeable batteries 4 pieces / AAA size 1.2 volt 1100 milliampere and charger)

9) wires (wires can be removed from the umbilical cord charger)

///////////////////////////////////////////////////

links to accessories (I bought all electronics on aliexpress)

1) arduino nano

https://aliexpress.ru/item/4000579100527.html?spm=a2g39.orderlist.0.0.47814aa623cHKw&_ga=2.254829007.656017014.1635797113-1882972174.1630166606

2) IR sensor HW-201 2 pieces

https://aliexpress.ru/item/4001294541207.html?_ga=2.254829007.656017014.1635797113-1882972174.1630166606&sku_id=10000015650371288&spm=a2g39.orderlist.0.0.47814aa623cHKw

3) Tcrt5000L IR diodes 2 pcs.

https://aliexpress.ru/item/32943225407.html?_ga=2.254829007.656017014.1635797113-1882972174.1630166606&sku_id=66184654299&spm=a2g39.orderlist.0.0.47814aa623cHKw

4)10K resistor

https://aliexpress.ru/item/32952657927.html?_ga=2.254829007.656017014.1635797113-1882972174.1630166606&item_id=32952657927&sku_id=66353322918&spm=a2g39.orderlist.0.0.47814aa623cHKw

5)toggle switches SS12D00G3 two pieces

https://aliexpress.ru/item/32964400942.html?_ga=2.254829007.656017014.1635797113-1882972174.1630166606&sku_id=66549810542&spm=a2g39.orderlist.0.0.47814aa623cHKw

6) servos MG 90s 2 pieces or SG90 (on aliexpress very often send fakes, so it is better to look for servos in your city or online stores in your country)

7) perforated film (can be bought at the advertising agency)

https://aliexpress.ru/item/1005001640957118.html?spm=a2g2w.productlist.0.0.41bb69c9XHIhFe

I did not buy the perforated film from this link, so read the reviews carefully.

The mask was printed on an artillery x1 printer

petg plastic , nozzle temperature 226 . table temperature 60 .

nozzle 0.6

layer height 0.3

speed 60

filling 96

concentric filling pattern

slicer cura 4.10.0