Gothic Wall Cross & Necklace Amulet Medieval Celtic Decor

Sleek and simple, this Celtic Cross adds a touch of gothic flare to any room decor. If you love it as much as we do, you can even wear it. It comes in two sizes and two STL files - one as a large wall hanging cross with an embedded nail hole in the back for easy hanging, and the other as an amulet to wear as a necklace.

Gothic Cross - Wall Art
The wall hanging cross is perfectly sized for decorating any room or hallway. At 100% scale, it measures:

X = 20.4cm / 8.0in
Y = 21.0cm / 8.3in
Z = 1.5cm / 0.6in

Embedded into the top-back is a beveled hole for easy hanging. Any nail or screw with a head of 4-7.5mm will hold it.

Gothic Cross - Necklace
As an amulet, our Celtic cross is more than a fine accessory. It's also a functional talisman to ward off negative energy. At 100% scale, the necklace charm measures:

X = 5.0cm / 2.0in
Y = 5.2cm / 2.0in
Z = 0.45cm / 0.2in

At the top of the amulet is a hole that runs from one side to the other. You can run a thin chord or piece of embroidery thread through it to make a necklace. At this size, it would be very difficult to get even a thin chain through it, but if you scale the X and Y to 115% and the Z to 130%, it should work. If the hole isn't open enough, use something like a thick needle to open it more. Heat the needle with a lighter and gently push it through the opening, twisting as you go.

If you like our Celtic Crucifix, please check out our ever-growing portfolio of STL models (including many more Gothic / Wiccan style items!)

• https://www.cults3d.com/en/users/GetPrinted3D/creations

IMPORTANT Copyright Info Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial License to legally sell our designs here:
- https://www.patreon.com/GetPrinted3D

The two files are very different sizes, requiring different quality settings.

Gothic Cross - Wall Art
Layer Quality Height: 0.2
Infill: 15%
Speed: 80mm/s
Supports: No
Plate Adhesion: None

Gothic Cross - Necklace
Layer Quality Height: 0.12
Infill: 100%
Speed: 60mm/s
Supports: No
Plate Adhesion: None