pico Talon - 3D Printed FPV Plane

Introducing the pico Talon: compact 900mm wingspan FPV aircraft in the popular push-propeller configuration with. Plane is suitable for long distance flights, smooth cruising, and also for flying in small spaces even without the use of FPV equipment. Aircraft can be successfully carried fully assembled, but you can also detach the wings. Wings mount is simple and solid. Nose of the aircraft is modular and completely removable. It has been fully adapted for the Walksnail system, but version for standard FPV cameras is also available. Nose file as well as several other parts is available in STEP format to facilitate possible editing and customization. Despite its small size, the fuselage is spacious and will even fit a Li-on 4S2P battery which will allow up to 2 hours of flight with recommended equipment. If you prefer less wing loading then you can use smaller battery and still enjoy a long flight time. Recommended motor is a T-Motor F90 1300KV and 7 inch propeller. However, 3 types of engine mounting have been prepared, so you will be able to mount most motors of similar size or even larger.

USER MANUAL: https://flightory.com/wp-content/uploads/2023/05/PICO-TALON-MANUAL.pdf

LW-PLA Airframe, several parts from hard material like PLA or PET-G

layer height: 0,25 mm
single wall 0,4mm thickness
3% Gyroid infill.
Temperature: 235 degrees,
flow 60%
fan speed: 0%