Skip to content

Resin VAT Heater System for ELEGOO Mars 3

20230415_2145d42.jpg Resin VAT Heater System for ELEGOO Mars 3
20230514_2a33122.jpg Resin VAT Heater System for ELEGOO Mars 3
20230514_2241020.jpg Resin VAT Heater System for ELEGOO Mars 3
wire.jpg Resin VAT Heater System for ELEGOO Mars 3
Resin-VAT-Heater-System-for-Elegoo-Mars3.jpg Resin VAT Heater System for ELEGOO Mars 3
Standard_Left_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Standard_Right_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Back_for_Exhaust _Module.stl Resin VAT Heater System for ELEGOO Mars 3
Back_Standard_Module_for_ELEGOO_Mars3_Infinity Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Front_Heater_Module_Corver_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Front_Heater_Module_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Heater_Module_Joint_Left_Front_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Heater_Module_Joint_Right_Front_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Heater_Module_M4_50mm_Knob_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Standard_Joint_Left_Back_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Standard_Joint_Right_Back_for_ELEGOO_Mars3_Infinity_Extender.stl Resin VAT Heater System for ELEGOO Mars 3
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.3k views
  • 11 likes
  • 3 downloads
  • 1 comment
License
3D design format
PDF and STL Folder details Close
  • Back_Standard_Module_for_ELEGOO_Mars3_Infinity Extender.stl
  • Back_for_Exhaust _Module.stl
  • English_Ver2_Manual_Resin VAT Heater System for ELEGOO Mars 3 Infinity Extender.pdf
  • Front_Heater_Module_Corver_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Front_Heater_Module_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Heater_Module_Joint_Left_Front_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Heater_Module_Joint_Right_Front_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Heater_Module_M4_50mm_Knob_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Schematic Heater Mounter for Mars3.pdf
  • Schematic Heater and Sensor Mounter for Mars3.pdf
  • Standard_Joint_Left_Back_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Standard_Joint_Right_Back_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Standard_Left_for_ELEGOO_Mars3_Infinity_Extender.stl
  • Standard_Right_for_ELEGOO_Mars3_Infinity_Extender.stl

Learn more about the formats
Publication date 2023-05-14 at 15:39
Design number 1220302
issa_mizutaka

issa_mizutaka

3D printer file info

3D model description

Overview:

This is a resin VAT heater add-on for the ELEGOO Mars3. It improves printing quality and work efficiency by maintaining the temperature of the resin.
※Completion requires parts and tools. Links to the parts list and instructions on how to make them are provided in the manual.

Features:

  • Easy to use: Can heat resin without warming up the bottle
  • Temperature control: Heats the resin VAT to the specified temperature, ensuring proper viscosity of the resin and improving printing quality stability.
  • Uniform temperature distribution: By heating the resin VAT, it minimizes the temperature difference between the build plate and resin. This allows printing to continue at a consistent temperature without the resin cooling during printing.
  • Efficient heat conduction: The Resin VAT Heater is attached to a metal resin VAT, allowing heat to be conducted directly. This achieves more efficient heat transfer than heaters that heat the air.

Parts list

  • Ceramic Cartridge Heater 12V 40W Diameter 6mm*Length 20mm
  • Termostat digital temperature controller 12V
  • Aluminum prismatic 10×10×150mm
  • DC power jack socket 5.5x2.1mm
  • AC adapter 12V 4A
  • Thermal conductive sheet Silicone pad
  • Thermally conductive grease
  • Hex bolt M4*50mm

Tools Required:

  • Soldering iron
  • Power drill
  • Metal drill bits (7mm, 5mm, 4mm)
  • Wood drill bit (11mm)
  • Aluminum saw

Reference links to the parts list and how to make them can be found in the manual.

Limited time only: on sale!

3D printing settings

PETG is generally recommended because of its excellent organic solvent resistance.

I also like this module, so please take a look at it.

Mars3-Drip-Angle-v16.jpg Build Plate Drainer for ELEGOO Mars 3
issa_mizutaka issa_mizutaka
Build Plate Drainer for ELEGOO Mars 3
  • 2.3k views
  • 11 likes
  • 22 downloads

ELEGOO-Mars3-Aduster-v6-front.jpg Horizontal Adjuster for ELEGOO Mars3
issa_mizutaka issa_mizutaka
Horizontal Adjuster for ELEGOO Mars3
  • 646 views
  • 3 likes
  • 2 downloads

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.