Claudia Airship SOA
Claudia Airship SOA
3D
Published 2023-05-18T08:49:03+00:00
I recommend printing the main hull L&R as well as the front fin and stand first.
then assemble the 2 main hull parts, then add the front fin.
After that place the assemble section on the stand for easier assembly of the other pieces.
I prefer Gel super glue because it fills in better and gives you time to get things in to place,
but this is just my suggestion you can use whatever you prefer.
I also recommend printing the model at 0.15 layer height.
I included a .zip with the sails for MMU printers,
you can see the MMU sails in the pictures.
Assembly guide added 6/18/2023
Claudia_Guide.pdf
Most parts will need support, I tried to reduce this as much as possible.
I aligned the parts to the best way I found to print them.
I also recommend printing the model at 0.15 layer height.
| Date published | 18/05/2023 |
| Technology | FDM |