Skip to content

Jing Yuan Spear - Honkai Star Rail

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 8.3k views
  • 23 likes
  • 65 downloads
  • 2 collections
  • 1 make
License
3D design format
STL Folder details Close
  • Full.stl
  • Part 1.stl
  • Part 10.stl
  • Part 11.stl
  • Part 12.stl
  • Part 13.stl
  • Part 14.stl
  • Part 2.stl
  • Part 3 .stl
  • Part 4.stl
  • Part 5.stl
  • Part 6.stl
  • Part 7.stl
  • Part 8.stl
  • Part 9.stl

Learn more about the formats
Last update 2023-08-21 at 20:11
Publication date 2023-05-22 at 00:44
Design number 1232075
Titi_cosplay

Titi_cosplay

3D printer file info

3D model description

He is one of the seven Arbiter-Generals of the Xianzhou Alliance's Cloud Knights and one of the Six Charioteers of the Xianzhou Luofu. Although seemingly lazy, Jing Yuan has ruled the Luofu for centuries, exceeding the reign of most of his fellow generals. This long reign of his can be attributed to his wisdom and attention to routine measures, with Jing Yuan preferring to be preventive rather than corrective.

3D printing settings

The Scythe is about 1850 mm long and it has 10.30mm holes to be able to place 10mm rods (wood or aluminum) as a skeleton.

Easy to assemble , all the parts are cut in such a way that they can be printed by an Ender 3 (20x20x30)

I tried to slice so no supports are needed, butsome parts will need some small supports.

It has 10.30mm holea in the handle to be able to place 10mm rods and 4.20mm holea in the handle to be able to place 4mm rods as a skeleton. ( you can buy theme on amazon easily )

I recommend aluminum. With aluminum rods it is lighter and more resistant, but the final decision is up to you.

IMPORTANT! Always assemble part 7 and 6 first! are the only pieces connected by a horizontal rod. If not assembled first, it will be almost impossible to assemble the Spear.

I usually print my parts with the following definitions:

Quality: 2.8
Walls: 3
Infill: 10% or 15%
Pattern: Zig Zag

I recommend an extra infill (between 30% and 60% because it is a connection piece ( Part 6, 7, 8 and 9 ? . The more infill and walls, the better. But this will increase the weight of the piece.
-From my own experience, I give a margin of 0.30 mm for the rods (wood or aluminum.), so that the rod can be placed and glued without the risk of them getting stuck inside the piece.
- When fully assembled, a small portion of the poles will be visible.
-I provide the full Spear not sliced and without holes, in case you want to slice in another way.

If you liked the model, please click on like and rate. It is very important for me to know that they like my models. If you have any suggestion or doubt, do not hesitate to ask. :)
You can whenever you need to send me a message here (Cult3D) or on my Instagram. @Titi_Cosplay

Luck on the Printing and happy cosplay! :D

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.