DEWALT on DYSON V7 and V8

DEWALT 18V adapter for DYSON V7 and V8 cordless vacuums and a gift holder for Dyson accessories.

**New model 2024!

To avoid index finger cramps ;-)

You have the option of using the vacuum trigger and a switch for permanent operation.

You can install only the micro switch for the trigger or only the switch.

If your Dyson's battery is dead,

rather than buy a replacement battery (or a replacement vacuum cleaner),

use this adapter.

Our Dyson vacuum cleaner is a beautiful tool,

but when the battery is empty we have to stop working.

I solved this problem. The battery is now external.

The vacuum cleaner works much better with the larger 4 amp-hour battery.

Normally the Dyson cuts the battery when under voltage, it makes several walks, stops and then stops.

Do not insist and change the battery.

*The wall bracket remains operational, but the top part must be replaced by the print bracket *.

Remove the DEWALT batteries from the adapter to charge them and store the vacuum cleaner.

Supplies

11 Wood screws 3 X 16mm

2 Flat terminal 6.3mm

1 Spring 5.5 X 17.5 mm

2 female terminals

2 non-insulated 4.8 mm female terminals (or solder wire)

1 Micro switch 20 A

Cable

1 Rocker switch

Toggle switch

4.8 female electric crimp terminals

Terminaux femelle

Spring

Flat terminal 6.3mm

Micro switch

Fuse Box Terminal Connector US

Male Terminals 6.3mm US

WARNING! check your wiring before use to avoid damage. Reversed polarity can be fatal.

With CULTS license Private use,

you are authorized to manufacture adapters for your own use.

It is not permitted to resell or give away the files and adapters created.

With brackets and 80° cantilever angle

There are very few brackets, and they're easy to remove.

-Layer height: 0.2 mm

-Filling density: 30%.

-Number of wall lines: 3 or 4

-Top and bottom layers: 4 or 5