Painting it Black Wednesday TV by SPARX 3D print model

New Addams Family TV series got mixed press, but I loved it, perfect casting in Jenna Ortega as Wednesday. My favourite scenes had to be the Cello on the roof and that black prom dress . . so using these as my inspiration and the advertising poster for the series of the Cello bow as a knife . . . . I have created a model based on the character and costume . . . This Download is

ONLY ONE MODEL WITH NO ADD-ONS.

If you want the “ADULT” versions they are available from this website as the parts in that download are interchangeable with this download.

Unfortunately due to the position of the Cello I was unable to create a model that could be fitted with magnets to allow swapping parts. All of the parts have to be glued into position.

Model is 220mm tall.(a full 1/6 scale at 5foot 1 inch and 32B-23-31)

1 upper torso 1 lower torso Dress and Chair (6 parts) 3 arms & 2 bow parts 2 Left & Right shoe

1 Head

1 Cello & 1 Cello in 2 parts 1 Cello stand and Base (2 parts)

20 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

It is advised to add legs and arms after painting. If using the Cello the arms are added last and fitted to Cello and upper torso at the same time.

Resin Printing; Hollow 2.10 Raft 95% Skirt Parts

Hollow 2.10 Raft 110% Cello Feet Upper Torso

Hollow 2.70 Raft 115% Head

DO NOT Hollow Cello Fret Chair Parts Any Arms Bow Parts

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts as some parts are specific to each lower torso