I've used the Empire's crest from Warhammer to make this headset stand. It's wall mounted with 2 screws. The crest is glued onto the other part. Easy peasy, Sigmar squeezy.
For the crest: • Size: +- 139 mm x 143 mm • Layer height: 0.30 mm • Infill: 15% grid • Support: no • Print time: 3h40m
For the wall mount: • Size: +- 100 mm x 130 mm • Layer height: 0,30 mm • Infill: 15% gyroid • Support: no • Print time: 7-8 hours Tip: I used 3 perimeter layers for extra strength