Cybertruck with sliding bed cover 3D print model

Important: print the model at 90 degrees resting on the wheels!

I designed a cybertruck with spinning wheels and sliding bed cover, the truck is print-in-place without supports, but you will need a good cooling system for it to print nicely.

Variations:

4x4

6x6

The cover is printed separately and it can be a bit tricky to insert it, but it should not be a big problem.

I designed this model to practice and learn some basic 3D modeling principles, this is more of a stepping stone for me, there is a lot more to come from this point on.

I think it turned out great, if you encounter any problems let me know, I want to provide good models for the lowest price possible and at the same time I love having a small income from my little creations, I hope it works for you guys too!

Thank you for your time and enjoy!

3D PRINTING SETTINGS

Layer height: 0.12-0.2 mm

Supports: No

Infill: 5-10%

Wall line count: 3

Top/Bottom layers: 4-5

Print time: 1-5 hours depending on size

Print speed: 50-60 mm/s depending on printer, print it slower if necessary