Symphonic Trumpet Mouthpiece Bundle 3D print model

This bundle includes a Small collection of printable trumpet mouthpieces well suited for symphonic trumpet playing. Included in this bundle are 7 models eqivalent to these mouthpieces: Bach1, Bach 1C, Bach 1-1/4C, Bach 1-1/2C, Bach 2, Tamaha John Hagstrom Model, and Yamaha Thomas Hooten Model.

Mouthpiece Specs: Bach 1 Inner Diameter-0.701 Cup depth-0.472 Throat-0.144 Outer Diameter-1.070 Overall Length-87.11

Bach 1C Inner Diameter-0.701 Cup depth-0.472 Throat-0.144 Outer Diameter-1.070 Overall Length-87.11

Bach 1-1/4C Inner Diameter-0.693 Cup depth-0.534 Throat-0.147 Outer Diameter-1.079 Overall Length-87.27

Bach 1-1/2C Inner Diameter-0.681 Cup depth-0.489 Throat-0.144 Outer Diameter-1.070 Overall Length-87.11

Bach 2 Inner Diameter-0.665 Cup depth-0.534 Throat-0.146 Outer Diameter-1.056 Overall Length-87.12

Yamaha John Hagstrom Inner Diameter- 0.684 Outer Diameter- 1.083 Throat- 0.158 Overall Length-87.78

Yamaha Thomas Hooten Inner Diameter- 0.694 Outer Diameter- 1.083 Throat- 0.149 Overall Length-87.52

I recommend printing on a resin printer. I print them on a Photon Mono 4K at 0.050mm layer height or 0.020 for less post-print polishing. For best results sand the rim of your print until smooth using 1000, 1500, and 2000 grit sandpaper then polishing using beeswax or another safe polishing compound.