Killer Keys 3D print model

Killer Keys are typically used by law enforcement and landlords as an affordable and disposable access denial device. A Killer Key can instantly and permanently disable a lock, and render all other keys unusable within the disabled lock. Once inserted into a lock, a specially placed and shaped cutout along the key blade ensures that the pins will fall behind the groove and become lodged, making it impossible to pull the key out. The key is scored along the width of the key between the head and the blade, so that once inserted permanently into a lock, the head can be snapped off, making the lock appear to be unaltered, at a glance. The door can still be opened from the inside, so no one can be locked in, only locked out. With this file, you now have access to all the Killer Keys you need. The STLs include all 3 Key Types: A Killer Key for Kwikset Locks, marked on the key head with the letter 'K' A Killer Key for Schlage Locks, marked on the key head with the letter 'S' A Killer Key for Padlocks, marked on the key head with the letter 'P' (note: the padlock key is for a generic padlock, and is the most commonly used key blade type for padlocks. However, the Padlock key may not fit in all padlock keyways) INFILL:100% SUPPORTS: not necessary POST-PROCESSING: Be sure to remove any burrs or over extrusions from the blade of the key with some light sanding, to ensure ease of entry into the keyway DISCLAIMER: UNDER NO CIRCUMSTANCES SHALL I BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR EXEMPLARY DAMAGES ARISING FROM THE ILLEGAL USE, OR MISUSE, OF THIS MODEL. ALL LEGAL LIABILITIES ARE ASSUMED BY THE USER. Never use the Killer Keys on a lock you do not own. Only use the Killer Keys in accordance with all Local, State, and Federal Laws.