Two Trees Bluer EndStop axis Z Kit-2 3D print model

3D Printer Two Tree Bluer - Kit 2 first version

In order to be able to assemble the table as shown in the “Dual Z AxisUpgrade Kit- video 2” and “Dual Z Axis Setup video 3”, it is necessary to use kit 2. This kit consists of some parts, printed and manufactured. With information on what the kit is made of and links to additional parts that must be purchased separately.

Note: The kit is designed and produced for a Two Trees Bluer 3D printer, the first version with the spring-loaded end-stop, but it has to be original from the factory. There are two ways to buy Kit 2 (the printed parts). They read or download the STL files. In the case of the Z Stepper motor cable adapter,screw and nuts, sold separately.

Dual Z Axis kit:

• (1) Z STOP – Endstop adapter

IS NOT INCLUDED:

• (1) M5 10mm screw
• (1) M5 T-nut
• (1) M3 Square nut
• (1) Z Stepper motor cable adapter (sold separately from My Best CNC)

Video 2 https://www.youtube.com/watch?v=WQgMohCXVoY&list=PLcqEw_QOIzp0GJz2S_vVFvadNFHx1Syr5&index=3

Video 3 https://www.youtube.com/watch?v=H5Y1meYXxho&list=PLcqEw_QOIzp0GJz2S_vVFvadNFHx1Syr5&index=4

contact: mybestcnc@gmail.com