Ortur Laser Master 3 Foldable legs

These extension legs are a good fit for the new Laser Master 3 laser engraving machine, especially using the YRR rotary adapter.

Better than the original kit sold by Ortur : it's not high enough for engraving bottles !
The feet base are screwed into the bottom of the machine replacing the original feet.

2 available sizes :
- Medium 155mm : for tumblers up to 95mm of diameter (Yeti 36oz / 1L or Standard 50oz/1.5L bottle)
- High 175mm : for tumblers up to 120mm of diameter (Yeti 64oz/1.9L or Standard 100oz/3L bottle)

Please note that high foldable legs are slightly larger than the machine due to the size to stay stable.

STL Parts needed :
- Support x4
- Leg x4 (Any size you choose)
- Anti-Slip square x4

For printing, you can use standard parameters, I tested 0.4 and 0.6mm nozzle and 0.2mm layer height. (I'd recommend 3 walls and 10% infill at least).
Printing legs gives you 2 choices :
- Easy print the plain version, or
- Print the plain version, without top nor bottom and tweak infill for the satisfiying look you want, no support needed.

Other parts :
- 4x M5x40mm cylinder head hex screws (Example : https://www.walmart.com/ip/M5-x-40mm-Socket-Head-Cap-Screws-12-9-Alloy-Steel-Black-Oxide-0-80-coarse-50-pcs/845085321)
- 8x M4x8mm cylinder head hex screws (Example : https://www.walmart.com/ip/Uxcell-M4-x-8mm-12-9-Alloy-Steel-Machine-Bolt-Hex-Socket-Head-Cap-Screws-Black-30-pack/48401100)
- I'd recommend thick/foam double-sided tape (for the anti slip square), but you can also screw them.
(thick double sided tape will prevent some vibrations and reduce noise in your enclosure.)

1) Print all the parts.
2) Insert the main screw for maintaining the 2 pieces (adjust screw torque manually at the end for the stiffness you want when folding the parts.)
3) Take out the standard feet and replace with the 4 printed feet.
4) If needed, tape all 4 anti-slip supports and put the legs inside them to reduce any movement.

5) Enjoy !

If needed, don't hesitate to contact me.

Other infos about size :

Ortur original foldable legs (+118mm) for tumblers up to 58mm of diameter (not enough fo 12oz Yeti cup).
Medium (+155mm) for tumblers up to 95mm of diameter (Yeti 36oz / 1L or Standard 50oz/1.5L bottle)
High (+175mm) for tumblers up to 120mm of diameter (Yeti 64oz/1.9L or Standard 100oz/3L bottle)

https://youtu.be/YKrPwCRI9KM