The Beach Bond Honey n Jinx by SPARX 3D print model

Two of the iconic Bond bikini moments Honey Rider/Ursula Andress and Jinx/Halle Berry so what’s better than one Bond girl when you can have both in one download, Fan Art by SparxBM. . . . This Download is ONLY THE MOVIE BIKINI VERSION ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODEL AND BASE. A NSFW adult add-ons version is available to purchase separately, please contact me for details.

The torso’s and head parts are removable and interchangeable with magnets (see pics)

Based on Ursula’s Measurements of 165cm Tall 38C–25–35 and Halle 166cm Tall 34DD–26-37

Model is 1/6th scale therefore 280mm tall without base

Honey/Ursula 3 upper torso Poses 2 Left Arm 3 lower torso’s 1 right foot 1 left foot 2 Head 1 Head pin 1 arm pin 1 Base 1 head stand

Jinx/Halle 1 upper torso Poses 1 Right Arm 2 lower torso 1 right foot 1 left foot 2 Head Use same head and arm pin if necessary 1 Base 1 head stand

1 set link arms 1 Dual Base FDM or larger printers

28 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

It is advised to add arms after painting. Resin Printing; Hollow 2.40 Raft 95% Torso,and Legs

Hollow 2.70 Raft 115% Head

DO NOT Hollow Arms or Feet

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..