Tawantinsuyu organizers

Organizers for Tawantinsuyu board game. The set contains: Resources organizer, Statue organizer, Building organizer, Weaving organizer, Card tray, Player's components organizer and Solo organizer.
All organizers fit the game box and provide quick game setup. However it's not an insert. All containers have lids to prevent components from falling out during the storage. Theme reliefs and cutouts decorate organizers. Sections have rounded bottoms and indentations to facilitate item draw.

RESOURCES ORGANIZER: It has circular shape. 4 sections are dedicated for 4 types of resources. The lid is secured with a Screw (it also functions as a handle). Around the container there are sculptured corns, potatoes and bricks.
STATUE ORGANIZER: Large and small statues are organized separately in 2 rows. The container was thoroughly designed to facilitate tile draw. There are 2 lids dedicated for 2 rows. Cutouts are related to Inca's gods: Wiracocha and Mamma Quilla. These are sliding lids, but they have to be placed above the container first - there are guides accordingly designed.
BUILDING ORGANIZER, WEAVING ORGANIZER: The 2 organizers are designed similarly: they have sloped back walls, serrations on the bottom and indentations to facilitate the draw. There is also a divider for weavings, so starting tiles can be separated. If you play with less than 4 players - tiles for more players can be separated with the divider. Stone walls decorate the Building organizer and tapestries decorate the Weaving organizer.
CARD TRAY: There are 2 sections for 2 decks. Sloped bottom and indentations facilitate the draw. It is designed for cards without sleeves.
PLAYER'S COMPONENT ORGANIZER: The container has 2 slots to separate player's components in 2 groups: conquest markers and the rest. Thus during the play you see how many stairs or conquest markers you have left. In the lid there is a slot for 5x tile. It is pushed in the shallow hollow (not too tight, not too loose). You can leave it there during the play or easily take it out (cutouts help to push out the tile).
SOLO ORGANIZER: So, as I have checked, Axomamma is a goddess of potato, so reliefs of potato plant decorate the Solo organizer. Components are separated in 2 sections.

Some photos in higher resolution:
The set, organizers closed
The set, organizers open
Resources organizer
Statue organizer closed
Statue organizer open
Statue organizer, guide
Building organizer
Player's component organizers
Solo organizer
Packed
Half unpacked

All organizers were 3Dprinted on Prusa MK3:
- in PLA (F3D Gold pearl),
- No support is needed,
- Infill 10% rectilinear.
Note1: I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.
Note2: I use Monotonic top/bottom fill to increase lid's quality.
Note3: Statue's lids must be placed up side down before slicing. Additionally 0.15 mm first layer height was set to increase the quality.
Note3: Guides for sliding lids were adjusted for 0.15 mm layer height.
Note4: Place the screw up side down to avoid supports.
Note5: The largest are pieces of Statue organizer. Lids' length is 235 mm.
Note6: I set Archimedean Chords in top/bottom fill for Resources lid.
Note7: I set 20% infill for the screw.

Printing Time (for one organizer of each kind):
8h34' - Resources, container
2h42' - Resources, lid
29' - Resources, screw
10h36' - Statues, container
4h32' - Statues, lid1
3h49' - Statues, lid2
7h11' - Buildings, container
1h18' - Buildings, lid
4h27' - Weavings, container
57' - Weavings, lid
19' - Weavings, divider
5h - Cards, container
1h7' - Cards, lid
5h2' - Player, container
1h10' - Player, lid
4h13' - Solo, container
1h17' - Solo, lid